Unanswered Questions

The following questions have been asked via Ask Felgall and we either don't have time to answer or we don't know the answer. Perhaps you can help. If you have an answer to one of the following questions please reply to that question.

If your question is listed on this page and you no longer wish to receive replies please let us know and your question will be removed. Questions will also be removed once a satisfactory answer has been submitted or after a sufficient period has passed that it appears that no reply will be forthcoming.


HTML Question

Hello Sir,

I have two accordians inside one div1 and there is another div2 below and these 2 divs under div1. My question is when i expand one of the 2 accodians or
both it should not push div2 below because everything should be displayed on screen without scrolling.


this i request to solve using only by css not by javascript.

Thanks in advance.
 
Reply
 

Word Processing Question

I recently upgraded from Word 2010 to Word 2016. I saved a lot of Computer tips and Fitness workouts & Tips on Cds, but now cannot open them in Word 2016. Every time I try to open them they would not open, so I had to re-install word 2010 also. How can I convert them to open in Word 2016 or how can I fix them. I would like to remove Word 2010 and just have Word 2016 installed in my computer. And now every time I save something from Word 2016, it saves it in Word 2010. Thanks.
Jim
 
Reply
 

Windows NT/XP Question

I have Windows 7 and just purchased Office 2016. I uninstalled my Word 2010 and installed my Office 2016, but when I go to open my Word, I keep on getting the error box saying, " Microsoft Word has stopped working and will close". Why is that doing this and what can I do to fix it? Thanks,
Jim
 
Reply
 

HTML Question

Appreciate,

Been mangling this website (mine) for years, its frontpage, what would you charge to rebuild in a more current format. I just need to be visible.

Thanks again...
 
Reply
 

PC Software Question

I have WD Anywhere Backup. I have 4 backup plans. when I open, it starts backing up all 4 plans. How do I stop it from backing up 3 of the plans while continuing to back up one plan only ????
many thanks in advance.

(I have Win7 system. each BU plan is to a separate external hard disk. I disconnect the Hard disks not needed for the backup I want.)
 
Reply
 

Windows NT/XP Question

Dell Inspiron 3521 Laptop.

HDD Went bad, Replaced it with a new Unformatted HDD.
When I turned the computer on, It asks for a Password, I cannot install New Win 7.
I installed another new unformatted HDD and when I turned the Computer on, It asks for a Password. What is going on.

Thanks
Jim
 
Reply
 

PC Software Question

Hi

How do I stop the Windows has Blocked Some Startup Programs message appearing completely using the Vista Registry only?

Thank you for your patience in this matter and I do forward to receiving a reply from you soon in the near future.

From

Mr Berwyn H Price
 
Reply
 

Javascript Question

Felgall,

This question is regarding the dynamic dropdown tutorial. I understand everything there, but I am designing a data entry page and need, upon entry to the page both the first dropdown and second dropdown to be selected. I have gotten the first to work, but I am having the second be selected automatically. I have tried using .selected = true. thank you for your help,

~Chris
 
Reply
 

Mainframe Question

Hi,

I have received the abend A6 in the process of inserting the segment.

A6 -> ISRT function message length exceeds allowable length.

I need to increase the message length and I have done it. Now I am not aware of how to increase teh allowable length. Please help me with it.

Regards,
Manoj
 
Reply
 

Browser Question

I am running Firefox as my browser and my homepage has changed to the start page of Firefox. When I go to Internet Options to change it back to myway.com that I had it before, the general tab under options is blank and nothing there to change. What is happening? I ran Malwarebytes, Superanti-spyware and Avast and deleted some files that they said were infected, but the general page under options is still blank. Is there a solution to this? Thanks,
Jim
 
Reply
 

Windows NT/XP Question


When I open up my Windows 7 computer (IE 10), 2 small windows pop up:

1 --"Make sure binary is stored at the specific the path or debug it to check with problems with the binary or dependent .DLL files."

2 -- "There was a problem starting: C:/users/RWF/AppData/Local/Playtopus/DownloadedInstallations/zzrcrthp.dll"

“The specified module could not be found.”

I have no idea what a binary is, so please help me get rid of these 2 opening windows.

Thank you immensely
 
Reply
 

Windows NT/XP Question

I have a promblem with my laptop Emachines e527 and his windows 7 64 bit...when it starts windows after few minutes screen is black and I have to shut it down...what to do"
 
Reply
 

Windows NT/XP Question

I try to install the reinstallation cd xp home sp2 into my dell Dimension 3000 and when it went into installing window I geg piease the file asm xp home edition service pack 2 cd is ne eded copy files D:1386 access is denied need help I CAN DO ANYTHING WITH THE COMPUTER
 
Reply
 

Windows NT/XP Question

I have a Samsung Galaxy 3 phone and installed my charter e-mail. It was working before but now when I go to check my mail on my desktop, I get the error message: "Sending of password did not succeed. Mail server mail.charter.net responded: [IN-USE] account is locked by another session or for maintenance, try again." It use to work fine before and I do not know why this started. Any ideas would be appreciated. I want to be able to check my e-mail on my phone and still leave it on my server to see on my desktop when I get home. Thanks.
Jim
 
Reply
 

Mainframe Question

Good Evening !
Could you please clarify on REXX panel doubts.

EVENTS SPECIFICATION


No of events to be added: ----------

Press Enter key to add events information

Specify the events:

--------- ---------- ---------- ---------- ---------
Press Enter to go to next screen



Validation:
No of events to be added:
Data type is numeric, values ranging from 01 to 20.
Specify the events:
This field should not exceed more than 50 char length.
Note:
The number of blank spaces and the value given in the No of events to be added field should correspond to each other. For Example, if the No of events to be added is 5 then only 5 blanks should appear in the screen under Specify the events and allow user to enter the values.

I think *REXX statement can be used.
 
Reply
 

Windows NT/XP Question

what makes the ethernet controller want to load I do not need it I have a working USB netgear wireless adapter with its own network adapter in my device manager no Ethernet cord connection and the Ethernet controller keeps trying to load at start up. even uninstalled or disabled on WindowsXp Home Edition.
 
Reply
 

Mainframe Question

is there a way to search a string of data sets for specific information and display gdg where info resides.
ie: find the field 65,000 in all datasets that begin with edi.prod.joesjob.*
 
Reply
 

Windows NT/XP Question

my laptop use windows 7 ultimate
but when i was instaled any software
there is show the allert message like
"com surrogate has stop working"

then i find the solution with "turn on DEP for all programs and services except those i select"

then add the program name "dllhost.axe"

after turn ok, there was show message
"you can not set DEP attributes on 64-bite executable"

please help me for solution :(
 
Reply
 

Mainframe Question

Hi, I know IMS program name and transaction name but not sure which MPP executes the transaction in the IMS region. How can I find the MPP taht executes a transaction/program? Thanks! Shashank
 
Reply
 

Mainframe Question

We have system that contains couple ISPF screens and REXX modules. If I press PF9 (for example) entered in 1 row (only!!!) disappear.
How I can fix it?
Thank you.
Lenny K.
 
Reply
 

Mainframe Question

HI,
This is Chaitanya.i faced one question on XCTL that,
EXEC CICS
XCTL PROGRAM(CURRENT PROGRAM)
COMMAREA()
END-EXEC.
THE XCTL PROGRAM NAME "CURRENT PROGRAM" IS THE PRESENT EXECUTING PROGRAM,SO WHAT WILL BE HAPPEND?AFTER EXECUTION OF THIS STATEMENTS.
 
Reply
 

Windows NT/XP Question

I have an hp Pavilion notebook that I use on trips and this weekend in order to prevent the Windows login and always asking for the password, I went through the following steps:
Click Start and Run
Type Control Userpasswords2 and press enter.
Uncheck the box for "Users must enter a user name and password to use this computer."
Click Apply and Ok.
After I did that, I now get the Log On To Windows Box with Administrator in the User name box. On top of that is another Login Message saying Unable to log you on because of an account restriction.
Now I cannot even get into my notebook, because I never had a password or login to begin with and do not need or want one. Is there any way to get my Notebook up and running again? I am running Windows XP on it. Thank you very much in advance.
Jim
 
Reply
 

Windows NT/XP Question

I have Charter e-mail for my main mailbox and once in a while, when I check it, I get the error message:

Sending of password did not succeed. Mail server pop.charter.net responded: [IN-USE] account is locked by another session or for maintenance, try again later.

I do not have a password. Later on when I try to check it, it will work as normal without any problems. Is that my provider doing some work on it at the time or what does that mean? Thanks.
 
Reply
 

Windows NT/XP Question

my sister is being attacked by hackers on face book her computer is very unstable. it is running xp as the operating system and i believe it is a dell. she has kespersky the computer and uses it every morning when she wakes up to scan for viruses but that only goes so far to help. more and more come. she can not download. she can now use her cd-rom nor uninstall programs. i bought system mechanic professional and want to install it on her computer but cant because the issue with the cd-rom, i use system mechanic on my computer and it works wonderful although i have nevef had computer problems. is there any option my sister has besides taking her computer to a computer store where they will charge us more money then what the computer is worth? thanks Ronnie.
 
Reply
 

Browser Question

hello,

im say sorry here,my english is no good,but i try to say the question i wan to ask.

my sis always use my fb account to play game,but i cant change password she will ask me again...

so have some way can make it when using my facebook account that game was no work,when she use back her account make the game work???

in same computer

thank for help..
 
Reply
 

Windows NT/XP Question

My hardrive recently crashed. I have the computer backed up but I failed to make a recovery CD, and the license code is gone. so... Is there anyway I can get Windows Xp Pro off the back up (on the external hard drive) along with its product key/license?

P.S.I can probably get a CD from someone else so all I really need is the Product key/license.
 
Reply
 

Graphics Software Question

Is Intel Pentium P6200 processor good enough for Photoshop CS5?
 
Reply
 

PC Software Question

After a system restore in windows Vista I cant find my docs and pictures.
I know they exist because my background pic for the desktop is the same as the one before the restore. I could find few of the docs in ROAMING folder of the Cdrive
Please help me find my pics and the docs
 
Reply
 

Windows NT/XP Question

My computer freezes up (hangs). When I turn on task manager and cancel task manager my program acts normal.
 
Reply
 

Mainframe Question

I am trying to FTP a maiframe file to a server and I got the access to do the transfer but when the run the job to SEND the file to the server, i get the S047.. Coudnt trace back the issue... Could some one guide me on this..

Error message:

XCOMM0053E #SUBTASK ABEND S047 REASON ******** IN MODULE(XCOMEX05),
OFFSET(+000000B2)
XCOMM0054I PSW at entry to ABEND: 478D1000 A72140EC
XCOMM0054I Data near PSW: 5810B440 0A6BD703 B10CB10C
XCOMM0054I Abending Instr ---------*
XCOMM0054I Registers at entry to ABEND:
XCOMM0054I 0-3: 00000448 0000003C 00000444 000135F8
XCOMM0054I 4-7: 0004D010 272BC518 00000000 00000000
XCOMM0054I 8-B: 0000012C 8002E5DA 0004B342 272BD7B8
XCOMM0054I C-F: A7214038 0004D6B8 A72140C8 2721430E
XCOMM0028E *TCP/IP* ABEND S047 DETECTED - XCOM RECOVERING
IP=XCOMIS1
XCOMM0780E

Cheers..Sai
 
Reply
 

Networking Question

I am trying to stream audio from windows media player using these instructions:
http://cowboyfrank.net/real/RadioStation.htm
Everything works fine as long as the receiving computer is in my local network. Anytime a remote computer tries to access my stream, they get this error:
"Windows Media Player cannot play the file because a network error occurred. The server might not be available. Verify that you are connected to the network and that your proxy settings are correct."
I have tried turning off both my windows firewall and router firewall. No difference. What do I need to do to resolve this?
 
Reply
 

Windows NT/XP Question

I have a folder on my desktop that is empty. It used to have mp3 files in it. When I try to delete the folder, I get a message reading, "Item not found, could not find this item." It then reads, "This is no longer located in C:users|etcetcetc. Please verify the item location and try again." I have tried everything I can think of, chkdsk, defrag, fileshredder, went to elevated command prompt and deleted the 8.3 name, and it is still there. Any help would me be appreciated. If it helps, the folder is an extracted .rar file.
 
Reply
 

Windows NT/XP Question

i have windows xp and when i try to download anything at all, it brings up the little page with the run or save options. when you click either one it will start the download but it stops at 99% downloaded everytime. what do i do to fix this?
 
Reply
 

Networking Question

how do i turn on my youcam 3 buit in camera on my compaq?
 
Reply
 

Windows NT/XP Question

I have had my Samsung R580 running windows 7 Home Premium for six months. About one month after i got it windows stopped recognizing that i had a battery in it. From then ive tried countless methods trying to fix it including turn all the icons on and off but the power one still re manes blank. and when i press Fn F2 (shows battery power) it says no battery yet i can still charge and use the battery with no problems. All i want is to get the icon back so i know when my batteries about to run out.
 
Reply
 

Networking Question

What is the data transfer rate in bps of a signal that is encoded using phase modulation with 32 different phase angles and a baud rate of 4000?
 
Reply
 

Mainframe Question

Hi,

We have initialized a new system v1r12. Mainframe system programmers are provided with ISP@MSTR option. I wanted to restrict the normal users getting ISP@MSTR instead they should be only able to access ISR@PRIM. Could you please let me know the way to restrict it.
 
Reply
 

PC Software Question

Hello, I downloaded iTunes and I am getting the following:

C:UsersAbielDesktopiTunesSetup.exe is not a valid Win32 application.

any ideas?

I am running Windows Vista.
 
Reply
 

Windows NT/XP Question

I Want To Completely Change the boot screen of my windows 7
I Know that there are 105 frames so i have made 105 pics.
I know this is possible but I do not know how to do it.
Size of every picture is 1024x768 pixels.
i Want that every picture should completely display.
And the last thing, i do not want loop in the display(optional)
I can also apply advance options

I hope that you can help me sir.

Please reply soon.

I will be waiting
 
Reply
 

PC Software Question

Hi,
We have a speaker system in our house that plays whatever is playing on the main computer if the speaker chord is plugged in. I was wondering how I could talk into a mike and transmit my voice live throughout the house without having to record a video or audio lets say and play it back, which works but not the same as live. Could anyone lead me in the right direction?
 
Reply
 

PC Software Question

I have lost my drivers for my disc drives on my desktop PC, I cant connect to the web with my desktop, I have a laptop with which I can connect to the web wirelessly, can I connect with my laptop download the drivers I need and then transfer them to my desktop via an ethernet (yellow cable)?.
I have XP operating software on my desktop, my laptop has vista home premium. Could you explain how I should do this
 
Reply
 

Word Processing Question

How do I combine two tables into one?
 
Reply
 

PC Software Question

hi. thanks for your help in advance. Anyway, my problem seems like it is windows media player. It never happens for a long time like 3 moths, Im using other players but really want to solve this problem. As to my question, it just doesnt open, no error code, no freeze, anything. Im trying to look at the task manager when I click wmp, but there will be a slight change for a moment then it is gone, and I cant see it opening even. When I search this problem, I learned that it may be related to some dll errors namely jscript. And there are some ways to add these Dlls to registry on the net. It seems like many people solve this problem by adding those two dll files. But my situation is different. When I type and confirm regsvr32 jscript.dll file it is okay, but when I try to do the same with regsvr32 jscript.dll, I get an error message saying jscript.dll module is installed but DllRegistyServer call failed. The code is 0x80004005.After learning this, I searched for this error on the net. Some people give advice in many different ways like running an elevated window but no way. I still get this error. I tried regedit already but it doesnt help, because Im not allowed to do anything in HKEY_ROOT. Im administrative account there is no other account, I tried closing UAC, closing family safety security, security wall, taking ownership of files and many registry fixing programs. I tried so many computerfix programs that I can not even remember. I tried dll fixers but I still cant open it. So any idea, any advice, any comment will be halpful to me. Please help, Im scared of formatting my computer, because Im scared of having such a problem and being not able to resolve it. have so many data in my disks, this is another reason. Anyway I just can not do it. PLEASE HELP ME.
 
Reply
 

Linux Question

Hello,
I have windows 7 running on a Raid 0 configuration and i would like to run either a Hackintosh ( i have a purchased copy) or linux. My problem is that both require your Sata mode to be set to AHCI and obviously i am running in Raid so thats what it is set to. Now that my raid is set up can i change the mode back to AHCI or can i use a different hard drive or what are my options. Thanks!
Daniel
 
Reply
 

PC Software Question

I had to wipe my drive due to viruses, and when i went to reinstall my windows software it is telling me i need to install a driver for my hard drive. What am i doing wrong? Where do i find this driver?
 
Reply
 

Windows NT/XP Question

Hello,

I am having a problem sending emails with attachments. I am using Windows Live Mail in Windows 7.



Using Windows Live Mail, normal emails with any attachment can be sent okay, but (in Windows Explorer) if I right click on a jpg, then Send to, then Mail recipient, then Attach Files (at desired size), then using the email program and try to send it, the email goes straight my Outbox and an error message will come up saying the task cannot be completed and will stay in my Outbox and not allow any more emails to be sent, until I delete any stuck emails. I can send a Word (doc) or PDF file okay.



There is a general message that appears at the bottom of the to-be-sent email that says Note: To protect against computer viruses, e-mail programs may prevent sending or receiving certain types of file attachments. Check your e-mail security settings to determine how attachments are handled. I thoroughly checked and tried various security settings too no avail. There seems to be a setting somewhere that does not allow sending a .jpg that way.



I have tried different settings for check for mail time period and send immediately etc.



Microsoft Support and on-line forums were of no help either.



Any ideas would be much appreciated.



Thank you.



Bill
 
Reply
 

Networking Question

my computer was wiped out and i dont have a disk to get linksys back what do i do?
 
Reply
 

Browser Question

Hi Steven
I developed an asp.net website and set it height and width to a fixed size. It looks fine on my system but when on other system access it, it looks a bit short in height and width like they are running on a hight resolution which is not the case. I want the look/resolution of the website to be same across systems. Could you please suggest something ?
I am only using IE8 and no mozilla/chrome etc and need to make it IE8 compatible. I came to know that using css its possible to fix.

Waiting for ur reply.
Thanks
 
Reply
 

Mainframe Question

I am receiving a strange return from my IMS call , it appears to be a hex 0038. Does this make sense
 
Reply
 

Networking Question

We are removing the SNA devices for the SNI link. TCPIP link already exist and the XCOM will be routed via that connectivity. Will there be any changes in the XCOM JCls other than mentioning the IP address instead of the LU. Also do you see any change in the XCOM configuration for the protocol change.
 
Reply
 

Networking Question

Both of my wireless usb adapters (WNDA3100 and TL-WN821N) are enabled but no connections are shown. I have already tried resetting the router, and reinstalling / updating the drivers for my adapters but neither worked. However when I plug either into my other computer they work fine. Any help to why this could be occuring would be greatly appreciated. Thank you
 
Reply
 

Mainframe Question

Dear Sir,

I have few questions

1. could you please provide information about AIBTDLI call that is used in my shop instead of CBLTDLI calls.
2. Purpose of CMPAT=YES in PSB.

Thanks,
Jagannath
 
Reply
 

Mainframe Question

Hi,

I would like to know the full command to display a text, say "sunil" in the middle of CICS screen using "send text" command. I will be executing the command from a CICS terminal.

Regards,
Sunil
 
Reply
 

Windows NT/XP Question

Hi I need some help from you.My computer on startup receive this http://i54.tinypic.com/2cpth0m.jpg
I cant run anything.Task manager too cant run.I have xp professional


Please if you know how to fix it please help me.You the best
 
Reply
 

Browser Question

When running explore 8 with windows xp, 32 bi8t system, how od I get web pages to open maximized all the time?
 
Reply
 

Windows NT/XP Question

I need help in changing the display language for my computer. The area where I should be given an option does not appear (control panel > region & language > keyboards and languages). What should I do?
 
Reply
 

Windows NT/XP Question

Today I was looking at some pictures on a SD Card and everything was working fine. I pulled out one card and put in another and MY COMPUTER stopped recognizing my SD Card drive. Could you shed some light on this and tell me what happened? I cannot play any SD Card now and have Windows 7. Thank you
 
Reply
 

Windows NT/XP Question

I plugged a removable device into my Windows XP machine and it prompted me for drivers. I loaded the wrong ones and the device did not work correctly. I go to 'device manager' and delete drivers and devices but when I plug the device in again windows does not prompt me for drivers, it just loads the wrong ones again. How do I stop this behavior? Is this because of an .INF file? If so, how do I find it?
Thanks, John
 
Reply
 

Mainframe Question

I am working on cobol in a tso/ispf/panvalet enviornment. I am looking for an easy way to transfer the source code of a program into a browse dataset.
When you compile code I know you get a browse.program dataset but it contains a lot of extra debuging information and columns of other information surrounding the source code listing. I'd like a fairly clean look, like you see when your in editor. I know I can print the code with the list source command but that is not what I wish to do.

Thank you for any help you can provide.
 
Reply
 

PC Software Question

When i surf the web or just look around on my desktop my computer runs fine but when i play games about 2 minutes of game play my computer freezes happens anytime i play any type of games that's not on the internet or desktop.
 
Reply
 

Windows NT/XP Question

When I go to start up my computer, sometimes Windows XP spack3 will not load, it freezes during the cycle. Usually, rebooting solves the problem but not always. It seems to be getting worse. Your thoughts?
 
Reply
 

Windows NT/XP Question

i have a problem. i forgot to boot the existing operating system on my computer before installing a new one. now i have 2 operating systems on one computer, but one of them i want to delete. how would i do that? p.s. how would i do that without using a bootdisk? because my disk drive doesn't work. only my cd dvd drive. please help. i'd appreciate if i had a step by step guide to solving my problem.

thanks in advance
ryan
 
Reply
 

Networking Question

Hi Felgall. I have two Win 7 computers that i need to transfer a lot of large files between regularly.
Each have two gigabit network connections on their motherboard. I use one connection from each computer to connect to a modem/router/switch to access the internet and this works fine. They are set up as a Home network and joined as a HomeGroup. When i transfer files between them they travel at 10Mb/s.
Can i use the two spare gigabit connections to connect them together with a crossover cable and get a faster transfer speed .If i can would you tell me what settings i need to insert in the two spare network adapters properties boxes to make it work ,or point me to an existing link that will show me.
Thank you. Ed.
 
Reply
 

Windows NT/XP Question

I am running AutoCad 2000. The "modify properties" dialogue box has stopped working so I am unable to change any object. Have I mistakenly altered @@a setting
 
Reply
 

Windows NT/XP Question

Using the XP shell command line, how do I alter a specific environment variable without losing the original value. Please give example. Thanks
 
Reply
 

Windows NT/XP Question

Hi i came across your site an i was wondering if u can help me out, i recently got a Toshiba Portable Drive an would like to know if i can run windows xp on it an how and if it can will i still be able to drag and drop files.
Thanks alot
K3egan
 
Reply
 

Windows NT/XP Question

I have a question. Removing or adding memory would not cause a motherboard to blow correct? Worse case would be the computer would not read the memory. I pulled memory out of a machine ( Gateway 838GM - 2005 refurbished 10/05 manufacture date) and after the memory was added back the machine smelled like it was burning. Boss thinks I blew the motherboard and I was on the machine but even if the memory was put back incorrectly that would only cause the machine not to read it. I said I blew the motherboard but it is not my fault. Thoughts?
 
Reply
 

Windows NT/XP Question

I have a problem with my computer.
Whenever I open it, the screen flashes the nvidia Bios
and it shows wierd symbols.
(example: CoPYrighT 200> )

After this, it ends up blank with a cursor blinking.
I'm guessing that its probably a hardware issue.
Can you please suggest a possible cause/solution for this?
 
Reply
 

Windows NT/XP Question

Had problems with computer, installed windows xp and drivers, only installed anti spyware but c drive is showing only 33gbs of space. I have carried out the same procedure on my sisters computer and she had 256gbs of space. I don't undrstand it,hope you can help. I did troubleshoot the problem and tried adjusting numbers in advanced settings as advised but then had to system restore mu computer. I would be grateful for any advice you could offer . Thank you.
 
Reply
 

Networking Question

I'm in the market to buy a house. I have an offer on a house with an integrated network. Every room as duel coax and cat5. I don't know much about networks. The only one I ever setup was between my playstation and my computer to play my movies on my computer on my tv. What can I do with this network and what should I do with it. I have 3 computers and lots of noble devices. And Internet enable devices like tv blueray and gaming systems. Also I would like to setup a video security system in the house.
 
Reply
 

Networking Question

i have an acer aspire 8935g and my bluetooth is not working i dont know how to enable it, would you be able to tell me how to enable the bluetooth and how to connect a device.
 
Reply
 

Mainframe Question

I would like to know if there is any DB2 utility which performs mass insert similar to Load resume function and actinvates the insert triggers on the table.
 
Reply
 

Browser Question

Dear, Felgall
My sister was playing this game on our computer called ourworld.com, while she was playing it a pop up came asking her to verify that she was human by taking a survey, usually she would just close those pop ups but she couldn't close it and she couldn't take the servey because it was a cell phone survey, so she just closed the site and re-opened the internet this time she tryed her game on facebook, it worked but after she was done playing I went on to check my facebook and the same pop up my sister got last time came up. I don't know what to do I already tryed deleting my cookies and all that but still nothing, please help me
 
Reply
 

PC Software Question

Hi,

Everytime I turn my laptop on after a shut down several programs have to either re-install or the config settings are not saved from the previous session. Three programs I have noticed the most are MSN messenger, iTunes, and Windows Media Player. MSN messenger settings are all set to default and I have to change them everytime I turn my laptop on. If i click the itunes icon on my desktop, it says 'preparing to install" then takes about 5 mins to load up..all the songs are still there though. And for WMP I have to re-select all the settings just like MSN. This is a Dell Inspiron 1520 laptop running Windows Vista. These problems do not occur if the laptop is awaking from sleeping...just shut down and restart.

Any help would be appreciated :)

Thanks.
 
Reply
 

Windows NT/XP Question

Hello,

Im not a gamer, but I would like to upgrade my current machine for until I can afford a new one. I run programs like Photoshop, Adobe Flash, along with other types of similar software that needs better performance.

My motherboard is a (Micro Star) MS 7061 Board Model: KM266-8237. My processor is an AMD Sempron 2400+ 1.67 GHz. I currently have 320 MB of RAM and Im running Windows XP Professional.

I need a memory upgrade and the information on this motherboard is either very limited or non-existent. Is 1024MB PC3200 DDR 400MHz compatible this machine?

The family member who gave this computer to me is our family computer guru, the computer was running glitchy so he gave it to me, which means he cant figure out how to fix it. I believe it has to do with the memory and the two memory sticks in it arent even the same brand he just stuck in what he had laying around. What the computer is doing is at times (not always) it just restarts itself and what I believe is happening is its running out of memory and doing a memory dump. I can tell you it runs out of memory easily. I have one program up right now (Google Chrome) and Im using 413MB of memory, which is over the 320MB of physical RAM. Im sure you can see how that would be an issue.

The information Ive been able to uncover suggests this board can accept 2GB of PC3200 DDR 400MHz RAM, but is this true? It also suggests that I can upgrade my processor, but whats the highest available AMD processor this board can accept?

Also, if that is the correct memory and if I do max my memory out to 2GB; what would the best page file settings be?

Thanks,
-Ryan
 
Reply
 

Mainframe Question

What is the major difference between READ and REWRITE command in cobol? how they are differentiated internally with respect to record buffer?
 
Reply
 

Mainframe Question

A program can "accept" the current date that is kept by the "system clock" and then have that information displayed by the COBOL program while it executes.

My question is this: Is there a way to capture the Mainframe CPU Serial Number from the "system" and then to have that information displayed by the COBOL program while it executes.

Thank You.
 
Reply
 

HTML Question

I was wondering if it was possible to link two pay pal accounts to one website. I share this business with my brother and was wondering if the merchandise he sales can go to his account and the merchandise I sale go to mine, but still have one check out button (shipping cost for either would also go to my account). Thanks.
 
Reply
 

Windows NT/XP Question

My current computer uses Win XP (TISP, file system), I recently discovered my 60gb hard drive is getting full. I have an old computer (used Win95, FAT file system), I took the hard drive out of the old computer and installed it in the new one. I did a clean-up on it and rebuted. All the files came back. So I am thinking I need to change the jumpers, Win XP uses the first 2 pins, the other uses the second one. I read here one would need to be a slave. Where could I find this info on the hard drive. Once I change that I would like to reformat the old drive. How would I go about doing that?
 
Reply
 

Browser Question

OK so the problem is that websites on Mozilla and IE are displaying and videos are working but the page layout dont look how they are supposed to. it looks like they just jumped out of Windows 98. I've tried doing virus scans with MalwareBytes and Microsoft security essentials. I also checked all browser setting and updated java, windows service, and adobe flash player and reader. Nothing has changed yet. PLease help!
 
Reply
 

Mainframe Question

How can you control space on an xcom between two IBM mainframes? File size = 1.4 gig More than 7 million records.
Can you xcom to tape?
Can you specify more than one DASD volume?
 
Reply
 

Mainframe Question

why does the password expires after 30 in xcom file transfer using snaplink.
Is there any option where this password cannot be expired.
 
Reply
 

Windows NT/XP Question

I have used aoutohotkey to create the following LButton::w RButton::s Very simple stuff right? However I'd like to know if there is a way to map two keys in one, I mean.... Can it still click too? I want w on left click but, I still want it to click. Can it be done and how? Thanx 4 ur time
 
Reply
 

PC Software Question

Hey

I have had my computer for more than 2 and a half years now. Ever since the beginning of my purchase My LG Lightscribe HL-DT-STDVD-RAM-GSA-H55L drive keeps of dissapearing my computer. This is what happens, I would switch on my PC and my DVD-writer would be there in my computer. I would put in a CD/DVD and it would work perfectly. I could watch a movie etc BUT after awhile my Movie which I would be watching would just switch off or when I am installing a game, That would just fail etc etc.

I can't figure out what is the problem. I have tried many things to prevent this problem but nothing works. This would just happen all the time. I toke it back to the place where I bought it but they said it was fine but it ended up not being fine.

Please can you help me I Hate having such a cool computer but the DVD writer don't work. I might not get this message again so can you please send your reply to my email (juaams789@gmail.com) Thanks for your support.
 
Reply
 

Mainframe Question

Hi,

I wanted to move the data from L - R from a perticulaer position,

Ex: before: 05 ASR(US-ATH-CHAIN-NBR PIC 9(9).
after:
05 ASR(US-ATH-CHAIN-NBR PIC 9(9).

could you please let me know if you have any command for the same.

 
Reply
 

PC Software Question

my letters g , h , backspace , F1,F2,F3,F4 and ESC buttons are not working on my Hp pavilion dv6588ee laptop and iam using the on-screen keyboard to write these letters ... can some one help me solve this problem... with some details please as i tried to solve it many times and i failed iam fed up from using the on-screen keyboard for months now... help is much appreciated...thanks in advance
 
Reply
 

PC Software Question

I have a Dell PC and I need to install an anti-virus program - what program do you recommend?
 
Reply
 

PC Software Question

I don't know how I have managed to cause System Restore to not work. When I try to set a restore point it says 'Restore Point not set'.
I am using XP Home
 
Reply
 

Networking Question

Hello,

i have a desktop which is using win 7 ultimate 64 bit and a laptop which is using win 7 home 64 bit. both are connected through a D-link wireless router. desktop is connected via LAN cable and laptop is connected via wifi.
the problem is i cant ping from lap to desktop or vice versa
message on cmd is 'request time out'
desktop ip -192.168.1.2
laptop ip - 192.168.1.3

my objective is to connect from laptop through remote desktop to my desktop. but it is not pinging
all firewalls are disabled on both computers
and remote desktop is enabled on both computers
please help

thanks is advance!!!
 
Reply
 

Windows NT/XP Question

Hi, I upgraded my Acer laptop from Windows Vista to 7. I still have access to both. My upgrade did not allow me to transfer my files because my Vista version did not allow it. How can I transfer my applications such as Microsoft Office and iTunes to my Windows 7?

Thanks for your help!
-Cato
 
Reply
 

Windows NT/XP Question

Windows XP does not remember my folder settings. I have gone to tools/folder options/vie/apply to all folders & it does not correct the problem.
I have also done these steps: Open the Registry and navigate to the keyHKEY_CURRENT_USERSoftwareMicrosoftWindowsShell. (If there is no such key, look forHKEY_CURRENT_USERSoftwareMicrosoftWindowsShellNoRoaminstead.)
Look for a pair of subkeys named Bags and BagMRU. If either is present, delete them.
Create a new DWORD value in Shell named BagMRU Size (note the space between the two words!) and set its value to 1000 (decimal). Larger values may not work correctly.
If If HKEY_ CURRENT_USERSoftwareMicrosoftWindowsShellNoRoam is present, repeat steps 2 and 3 with that key as well.
Reboot.
still doesn't work & I also set the values to 5000 but still did not work.
 
Reply
 

Mainframe Question

How to restart a particular step within the PROC that within another PROC.

JCL
---
JSTEP010 EXEC PROC=PROC1

PROC1:
------
PSTEP010 EXEC PROC=PROC2

PROC2:
------
PSTEP020 EXEC PGM=PGM1

I want to restart the PSTEP020.
 
Reply
 

PC Software Question

Hi i have a problem i use windows media home cinema, and when i watch films from the laptop to tv through hdmi i can usually watch them no problem and i close my laptop lid sit back and watch them, however, with some avi files when i play them put them on full screen of my laptop (as usual i do) when i close the lid (like i always do) it sometimes freezes then flashes on a still image and i can here the audio fine but picture is frozen and flashes please help, i have tried using VLC player, dvix, windows media player but them 3 when i close my laptop lid goto half screen, i clone my pc to tv but this fault i never used to have its becoming more common recently and its bugging me and before anyone suggest leave the lid open you get flashing lines down the screen when lid is open thanks i use vista and on close lid power options are do nothing
 
Reply
 

Windows NT/XP Question

I download'ed picture's from my Iphone to my computer desktop..When I put them in a folder it work's but then I get copie's of them back on my desktop. I have over 1000 picture's and this is very time consuming..How can I get all the picture's into the folder without doing them one at a time,also so that i dont get o copy of it on my desktop again?? Thank You Natalie
 
Reply
 

Mainframe Question

Hi,

One of my IMS program is using lots of Static call to subroutine. I need to change that to dynamic call. Since it is not possible, I want to use IMS preload.
Could you please let me know how to use 'PRLD' option in the Parm parameter, it will be in the 7th position for BMP.But Do we need to mention PRLD=01 or only 01 in the 7th position. what else needs to be changed in the JCL/PROC? Do we need to include all the member in the control cards and use in sysin. My Job is using the accepting the check point id from the Sysin parameter.

Please expain details of all the Parm parameter used in IMS.
 
Reply
 

Windows NT/XP Question

i have new lenova s 12 notebook.everything was fine,but since last three days i am experiencing problems in watching online videos.the videos is not smooth,it comes in bits,the audio is very clear and smooth but video comes with jerks.theiris no prolem in speed or buffering.just the videosnot coming smooth.
 
Reply
 

Linux Question

Hello!
So, I got a horrible virus not too long ago and it completely destroyed windows (and as it turns out I think, my hard disk) so I booted up off of trinity but couldn't get rid of the problem, so I uninstalled windows, then installed ubuntu. It automatically ran a S.M.A.R.T diagnostic thingy - and is telling me my disk has many bad sectors, but just one really, apparently, my reallocated sector count value is 262167 sectors. Now. Can that be right?
And would my computer even be running if it was right?
A confused girl from England.
 
Reply
 

PC Software Question

I have an Acer Aspire T180, and I have been trying to reset if back to factory defaults for days. I tried pressing Alt+F10 and it came to the recovery management page but it just keeps getting stuck. I tried to recover it from my back up disk and it get stucks at a gray page. What can i do to recover my computer without paying?
 
Reply
 

Javascript Question

hi.. i am doing a project in embedded systems. At the user end i am using javascript to build a web page interface. At the device end i have got a cgi server. I am able to read data from the server using javascript but not able to pass data to the server. Can u pls help me out with this.
 
Reply
 

Windows NT/XP Question

I have a emachines monitor running on a generic pnp driver on Vista Home premium. Somehow one of my kids has managed to set my screen so that when the Vista login page comes up, everything is horizontal instead of vertical.(I have my monitor laying on it side right now). Even when I log in to my account things remain vertical. I have tried all of the external monitor settings and I can find nothing in display settings that would account for this. Any ideas?
 
Reply
 

Mainframe Question

7' mini notebook (epc701) how to get mouse working from usb port
 
Reply
 

HTML Question

Hi Felgall!

I`m trying to interact with the internet explorer using the Visual Basic.The main idea from my code is to open a internet explorer page, see all the object on the web page and identify which ones are buttons and input box!

Could you help me?!
 
Reply
 

Windows NT/XP Question

I just did a reinstall of Windows XP due to a trojan virus that affceted the computer (Dell Desktop). All went well and XP is back and running fine. Reinstalled Office just fine as well. Had to register it all via phone though because the internet won't work. I connect through cable and the whole house is wireless. All other laptops working fine through network, but this one plugs directly into the cable modem. Yet the computer won't give me any option to connect to the internet. When we first had it installed, it was plug and play - no special software or anything required. But now it won't work. Any thoughts on how to get me back on the internet? I did try to cycle the modem too with no joy. Thank you very much!
 
Reply
 

Mainframe Question

Hi,

Just wonder if you could help me.

I want to use XCOM receive file from another platform.

COuld you tell me if below parameter I am currently use are correct.

IPNAME=999.999.99.9
USERID=USERID
PASSWORD=PASSWORD
TYPE=RECEIVE
FILETYPE=FILE
FILEOPT=CREATE
LFILE=LOCALFILENAME
FILE=DESTINATIONNAME
Thanks
 
Reply
 

PC Software Question

hello, thank you fro taking the time to read this i have a quick question i have installed windows xo professional on my computer and when i logg onto my user account no icons come up on the screen, neither does my start menu/ taskbar all my icons come up and so does my taskbar after about 2 mins have pass please help me, this problem did not start untill i downloaded 2 programs, quick time player and optononline back up. pelase answer my question as soon as possible, this problem does not occur on just 1 of my towers it accurs on 2 of them but all of them have the same program.
 
Reply
 

PC Software Question

I dont know what triggered my problem my avg found something the other day and i had it removed and i have been installing new windows updates but since then all my programs are asking me what do i want to open it with. ex: i try and open calculator - window pop's up with 'open with' on top. i just want my comp to open all files with the default program
 
Reply
 

Windows NT/XP Question

what is heoaniq.exe? i can't get rid of it from my task manager and it is using all my memory?
 
Reply
 

DOS Question

I have an old Dell desk top with Windows ME and no cd burner. I want to get all of my digital photos off of it so I can get rid of this computer. Ideally I'd like to have them on disk for future viewing rather that on my new laptop taking up a lot of space. What do you suggest?

Thanks so much
 
Reply
 

PC Software Question

I cannot download anything on my laptop. I tried to download both on firefox and internet explorer. When it is finished with firefox it doesnt let me open it, and with ie it says publisher not verified but when i choose run it does nothing. i cannot put the software i really need. please help me
 
Reply
 

Windows NT/XP Question

hii sir! from the last few days whenever i insert my pendrive i get a icon of the name autorun inside the pendrive so because of it i cannot format my pendrive also i am unable to delete it whenever i try to delete it it displays the message 'autorun is being used by another program....'please help
 
Reply
 

Windows NT/XP Question

When my computer boots up, it stays on the Welcome screen. I then turn off the computer, reboot and it goes to safe mode. I then go to a restore point, and the computer work fine. Once I shut down the computer, I have to do the above everytime to use the computer. Thank You
 
Reply
 

Word Processing Question

I have got Norton Anti-virus 2010 and installed it in my computer. I have Windows Vista and did have an earlier edition of Norton Anti-virus before I upgraded, but since I got 2010, it seems that every time I open up Microsoft Word, whether it is a new or saved document, it will take forever to open and it always says on the bottom that it runs a virus scan. It also takes forever for it to close. Why is this happening this way and is there a setting that I can set so Word opens and closes faster? Thanks for any suggestions.
 
Reply
 

Windows NT/XP Question

Are there problems operating Outlook 2003 with Windows Vista?
 
Reply
 

Windows NT/XP Question

None of the icons on my desktop will move to the right side..also, when I open a browser, it won't expand to the full size (again, issues with the right side of the desktop)
 
Reply
 

Browser Question

Is there a way I can check I am getting the correct broadband speed I am paying for?
 
Reply
 

Interactive Web Question

please can you tell me how to set up a cron job to back up all my server files and then to store it on my local server or to email it to me.
 
Reply
 

PC Software Question

i just changed my motherboard and hd and now when i boot up with my hd first in the boot order i get master boot record error and when i put my dvd writer first in the boot order i get boot from disc even when i have the windows xp disc in there. how can i fix this?
 
Reply
 

Networking Question

My computer recently crashed and all i have on it is my operating system.. What else do i need to put on it to get my computer up and running again?? I can't even get on the internet because it it telling me i have no network adaptor. I tried to load up my router disk and I got that message of the network adaptor.. Please help me..I have all the disks that came with my computer..I'm currently using a dell studio 1535 with windows vista..
 
Reply
 

Networking Question

I have recently got a laptop and have connected it to the home network via a cable. the network consists of a downstairs family computer, another desktop and sometimes an xbox 360 is plugged into the network. The internet always works fine on the desktops and xbox but my internet stops working after approximately 2 hours and i have to restart the laptop to get it to work again. When it fails to connect to the internet it says in the status box that it is still connected but it fails to load browser pages and msn etc. i dont know what to do to prevent the problem. please help
 
Reply
 

Networking Question

Why when I connect to internet about 5 minutes it always disconnect automatically.I use broadband 'Huawei'3.6Mbps.Please help me.....
 
Reply
 

PC Software Question

I am not very knowledgable about PC processes. I lost all my backup files on a removable Lexar 4G flash drive. I haev searched the internet and used some of the trial software to recover these files. However they all find a variations on my files. Can I recover files myself or must I use one of these software programs. I tried Badcopy and Pro Data Doctor Pvt. Ltd. but am scared to buy them incase they are not genuine. Can you please advise me what to do.
 
Reply
 

Mainframe Question

I have IMS online MPP program running in Live. This reads messages from IMS Queue and insert response to IMS queue. The requirement is to find out if my IMS online MPP program/region is running or not from a CICS program without sending a message to online MPP program.
 
Reply
 

PC Software Question

Dont know where to ask this question?

In 1974 -when I was 4 yo and before anyone had camcorders my mom recorded Christmas eve on cassette.
This cassette is very presious to me and I would like to converte it to cd.
I have downloaded audacity and connected the cassette player to the mic on my pc. The sound on the cassette is ok, but when I connect with the pc it gets very (P)itcy and scratcy (haha) and I cant seem to do anything about it? Why does the sound change so much?
What to do?
Thanks:}
Jette
 
Reply
 

Windows NT/XP Question

can i install xp 64 bit on my pc this is my processor information?
Processor_Architecture=x86
Processor_Identifier=x86 Family 18 Model 2 Stepping 7 , Genuineintel
Processor_level=15
Processor_version=0207
Category
Computers & Internet > Hardware > Desktops
 
Reply
 

Browser Question

How do I deny internet access with Sonicwall to Statically assign an IP based on that machines network MAC Address and then set a rule in the Sonicwall to denying internet access?

 
Reply
 

Networking Question

How do you set up a RIS server. I have the RIS server/dns server, DHCP server, domain controller/active directory

what are we missing
 
Reply
 

Javascript Question

I'm trying to figure out how to create drop downs list/menus like incfile.com hason their site. My desire is to have the following:

Drop Down #1 (INC, LLC, Non Profit)
Drop Down #2 (Alabama and etc...)
Text Field (showing a price based on an LLC in Alaska)
SUBMIT BUTTON
CLEAR BUTTON
 
Reply
 

Windows NT/XP Question

Hi

Im in a tough predicament. Would you mind giving me some pieces of advices?

I installed Windows 7 as my operating system and locked one of my drives by bitlocker. After a while I changed my OS to window XP sp2 ( without turning bitlocker off) in that case my locked drive was not showed at all, so I decided to install windows 7 again! That locked drive was showed as a raw drive and I formatted it ( quick format as NTFS ). No data was on it.
I tried repair-bde.exe but destination drive did not open and wanted to format it. When I want to check it with chkdsk I face an error says boot sector is unreadable.
By the way I tried latest version of software listed below and unfortunately none of them helped:
Easy Recovery Final Data - DiskInternals Partition Recovery R-Studio - Paragon Hard Disk Manager - PTDD Partition Table Doctor Test Disk and so on

I were pleased if you could help me to retrieve my files.

Thanks

 
Reply
 

Windows NT/XP Question

Have been burning movies and torrents for years now. Useing both nero (for torrent)and dvdshrink and decrypter (for movies). About a week ago, now neither nero or dvd decrypter burns movies. DVDshrink will shrink movie. But decrypter will not burn it. Yet am able to burn CD's of music. Have both a internal and external DVD burner hooked up to my computer and same problem with both. Have tried other programs such as DVDFab, CloneDVD2 ImgBurn etc and still no luck. My computer processer is a Intel Celeron d 2.40Ghz. Memory (Ram) 2.00 GB, 32bit
 
Reply
 

Mainframe Question

We have jobs with multiple xcom steps. One of these abend during execution.
JCL:
//STEP0100 EXEC XCOMNTSN
//SYSIN DD *
ID=CCPR531D
FILE=\\NT0000##\MFXTRACT\CORPORATE\BASEPRIC.TXT
LFILE=CCPR.BASEPRIC.CCPR530
/*
//SYSOUT DD SYSOUT=*
//SYSOUD DD SYSOUT=*
//SYSUDUMP DD SYSOUT=*
//*

Error:
XCOMM0785I STARTING TCP/IP CONNECTION TO PORT=####, IP=##.#.#.##
XCOMM0786I TCP/IP CONNECTION ESTABLISHED WITH DEST=**NONE**, PORT=####,
XCOMM0402I REQUEST NUMBER 824977 ASSIGNED TO TRANSFER REQUEST
XCOMM0126E FMH7 SENSE 00000000
#XCOMN0417E Attempting to create an existing temporary file name
XCOMM0402I REQUEST NUMBER 824977 ASSIGNED TO TRANSFER REQUEST
XCOMM0094E INVALID STATE FOR SEND COMMAND XCOMXATT R
XCOMM0780E Txpi 215: Socket send error return value = 140

Is the error because the server was unavailable for the send of data?
Thanks,
Susan
 
Reply
 

Networking Question

I have an IBM Thinkpad R50. I reinstalled windows XP and now can only access the internet by plugging into the router with my laptop. Can you give me a link so I can download the driver needed for the wifi? I downloaded a few wireless drivers but they still dont correct the problem. Thank you, John G.
 
Reply
 

Windows NT/XP Question

hi i have a gateway nv52 running vista the proplem im having is that when i go to my bios screen to to change my boot option i cant change it to where i can boot from a cd and then when i go the main screen in the bio it says that the f12 boot is disabled and its grayed out what to i do
 
Reply
 

Windows NT/XP Question

0
 
Reply
 

Networking Question

As you can see from the title, why can't my windows 7 computers see my cousin's windows vista computer in our network? Vice-versa, he also cannot see my 2 windows 7. I checked the network map, his computer is showing up there, but he's unable to connect to any LAN games we play or any other network related features.

Well we can play some games that have an option to connect by typing the IP, but some games like Resident Evil 5, does not have this feature, so we are pretty much screwed.

Even weirder is that my aunt came back and she also has a Vista laptop, but we can see her on the network!
My cousin has off his firewall also.


If anyone can kindly help, thank you in advance!
 
Reply
 

Networking Question

1
 
Reply
 

Networking Question

hi, I am currently unable to get on my wirless network at home in (in a shared house).
I type the WEP key in and in says connecting for ages, then stops.
I can get on other networks with this laptop, and other people are able to get on this network with their laptops, so i am very confused why this is happening.
 
Reply
 

Networking Question

I am the family tech support go-to guy and am trying to help my stepmom with joining her laptop to her wireless network (which I set up).

IBM ThinkPad 2897 laptop running WinXP Pro and has wireless card inside. Don't currently see an option for WPA2 for wireless connectivity/security, only WEP. But the wireless network is secured by WPA2.

I think there's a driver or file to download that will enable Windows to 'see' this option and add it to the list of available wireless network security protocols, but I'm not sure and not sure where to find it.

I am attempting to join this laptop to the home wireless network which uses the WPA2 protocol with a key (password).

If you are able to provide assistance, reference, recommendation, or a tutorial, please let me know. I certainly appreciate and thank in advance anyone who can reply.

Regards,

Chris M. (mailto:tygerzoyd@gmail.com)
 
Reply
 

Mainframe Question

Hi,

I have to schedule a batch file in windows which XCOM's the file to mainfram system.
Could you please help to create a script for this?

Regards,
Muthu
 
Reply
 

Mainframe Question

I get an error message that relates to partial incompability. I have an E-Machine computer with Vista. Here it is:
error message-system 32\spool\DRIVERS\W32X86\3\lxdvPSWX.EXE
How can I fix this so I can print again?
 
Reply
 

Windows NT/XP Question

i am using windows Xp.when i hide a folder it becomes hidden but when i unhide the same i unable to view that folder. when i serach the file i see them but when i locate them i unable to see please help me.
 
Reply
 

Windows NT/XP Question


WHY DO MY MPEG-1 VIDEO FILES PLAY IN THE WRONG ASPECT RATIO IN WINDOWS XP?


Hi

I was previously running Windows Vista and everything was fine with my videos then. But I'm back on XP now and for some reason all of my MPEG-1 video files play in the wrong aspect ratio.

I am very confused at why this is happening because they played fine when I had Vista. It's the same video files and I'm using the same laptop. The only change is that I'm using XP now.

The video files I'm experiencing problems with are in the 4:3 ratio. When I played them on Vista I had two big black lines on both sides because my laptop is widescreen, and it looked good like this.

But now for some reason Windows XP is forcing the video to be stretched to fit the whole of my screen and this is deteriating the quality of the video. I came across a page on the Microsoft website that I thought would help me. Here's the link.

http://support.microsoft.com/kb/817079/en-us

I was running XP service pack 2, and that page states that if you upgrade to service pack 3 it will fix. Well I'm using SP3 now but the videos are still being stretched to fit my screen.

Can somebody help me with this please?

Thanks to anyone who replies.
 
Reply
 

PC Software Question

OS WIN XP Pro. Word 2000 worked perfect until recently.Activate Word do not get menu, tool bar, ruler, only the paragraph symbol instead of blinking cursor. Run two virus programs and am clean. All other program run OK. Any help will be greatly appreciated.
hatcherg@cox.net
 
Reply
 

Windows NT/XP Question

Hi
I have a ACER ASPIRE M3641
Intel Core 2 Quad Q6600
Motherboard - MCP73PV
memory - DDR2-(pc5300) 4gb
Windows Vista Home Premium Service Pack 1
would like to replace with Windows xp pro
ACER say this can not be done, the motherboard and Bios was bulid for Windows Vista only
this is correct, or can someone out there tell me how to install windows xp pro

HELP ? HELP ? HELP ? David
 
Reply
 

Windows NT/XP Question

My computer says it is out of memory space. If I click on (C:) and then 'Documents and Settings' I then look at 'properties' of various folders. A folder labeled 'Mandy' says it's size is 28.6 GB. When I click on the folder I cannot find what is taking up so much space! All hidden folders are showing. What can I do?
 
Reply
 

Windows NT/XP Question

I recieve emails in outlook from advertisements (Lands End, Abercrombie etc...) and i can not click and reach internet site. A box pops up and says contact administrator - This is new....I always am able to do this - what is up??? Thank you
 
Reply
 

Windows NT/XP Question

So I have a friend who always uses my laptop which bugs me alot so I thought it would be funny to flipped the screen by pressing ctrl alt down and it flips 'haha' right? well I turn it off and hand it to my friend and said its your turn and he starts it up and the jokes on me the screen is upsidedown no problem there that was the joke but... it gets stopped just before the logon screen where it says windows is starting up and doesnt load past that. Its not frozen because I can move the mouse but click the mouse button 6 times it makes a strange beep and bam the mouse cant move whereas all other buttons still work. Well I tried pressing ctrl alt up to reverse it but it just wont work. I tried to go in all sorts of safemodes and it isnt upside down but your as good as stop in your tracks shot dead if you want to start windows up. Then tried to restore well it flips back up... but then stops same place. Need some help because its really irritating and I can get anything done (ps dont have the startup disk so reseting aint a option really.
 
Reply
 

PC Software Question

I have a Lenovo Thinkpad R500 that my school is providing for me and I cant figure out how to get the fingerprint reader to work. I have tried installing software but it requires a universal USB. I was wondering if i could enable it with any cords?
 
Reply
 

Graphics Question

My computer (that ive had for a year) all of a sudden is shuting down after awile of me turining it on and using it, and when i turn it back on it comes back in the smallest resolution and 4 bit color, ive updated the graphics cards, and cleaned it off a bit, what is the cause of this and how can i fix it? its been happening for 4 days strait now, and wont let me turn up the resolution unless i restart it a few times.
 
Reply
 

PC Software Question

dear sir,
i run a cybercafe with 12 pcs.i want to scan and block all outgoing mails from this 12 pcs because often people misuse yahoomail or any othermail for sending threat mail.is there any software that scans the subject of the mail,if the mail contains offensive words like bomb,kill etc can be blocked from sending.iam much thankful in advance.
jaison
 
Reply
 

Windows NT/XP Question

I am trying to speed up processing time in my Dell PC. I defrag... clean old files... I have 70% free space and my system is so slow. I downloaded registry mechanic and it shows like 300 problems... didn't fix any but I am not understanding what I should do to speed up system to it's optimum... please help
 
Reply
 

Windows NT/XP Question

I accessed Control Panel> Region&language option>Advanced to change the language for non-Unicode program. But when i pressed Apply or Ok i got a message 'Setup was unable to install the chosen locale. Please contact your system administrator' although my account type is administrator with full access. Please help me with this problem. Thank you!
 
Reply
 

Mainframe Question

Hi , Is there any way to get back the deleted files (Both GDGs & Flat files deleted by either Manual deletion or Thro' job ) , I have tried by using
HRESTORE 'old file-name' Newfilename &
HRESTORE 'Old file name' - TSO cmds however it doesn't worked.I'm using TSO - Z/os enviroment (JES2)
 
Reply
 

Windows NT/XP Question

My computer (a dell dimension 8200 with xp pro) became infected with viruses, including the amvo.exe virus. I cleaned my computer with updated norton anti-virus and I also found a special program made specifically to kill the amvo virus (because Norton couldn't help with that one). It's my understanding that the amvo virus spreads thru autorun. Everytime you connect a drive, auto run immediately spreads the virus. As a result it infected every drive I had conected to my computer (internal, external & portible usb pen) It also infected another computer that I had hooked one of the same external drives to. I cleaned that computer and even reinstalled windows in the initial infected computer (three times!!!). However, I can no longer access my LaCie 2tg external drive. I disabled auto run to stop the amvo virus that I am sure is in the LaCie 2tg drive from reinfecting my now clean computers. But I can't clean the virus out of the LaCie 2tg because I cant get either of my computers to recognize it anymore. I am sure this is not a driver issue. I believe the virus damaged the LaCie somehow and is now preventing my computers from recognizing it. The drive is spinning and I am sure it is functioning properly (i.e. not clicking or othwise physically damaged). Previously, I couldn't get other 1tg drives I own to be properly recognized until they were cleaned with the amvo removal tool. Now they are fine. The problem is how do I clean and/or repair the LaCie 2tg drive. It doesn't show up anywhere in computer management. The drive itself seem to try and respond when hooked to my computer (i.e. it blinks like it knows its been connected). But, then nothing happens and I can't find any traces of my computer actually recognizing it. I pulled the drive out of the LaCie case and tried attaching it through my sata card (as two seperate 1tg drives). When I started the computer it saw 2 1tg drives, but only as a brand new drive in need of formatting. I thought about trying to reformat it and to try recover my data with my copy of file scavenger, but I really don't know what to do and I dont want to make my situation worse. Please advise.
 
Reply
 

Windows NT/XP Question

I have an Acer 4730Z lap top. It has 2gb ram, 250 gb hard drive.I purchased an additional 2 gb of ram(ddr) and installed it. The system still reads 2 gb. Should it not read 4gb?
 
Reply
 

PC Software Question

Hai Felgall,

I have created a file upload program in my office using Apache's Common.fileupload and commons.io jar files((Java Program used for FileUpload)).Since it can upload any type of file say pdf, Windows Media player etc....the problem i am facing is when the access is given to a large number of people, many connections are created in my server, The company's server capacity is not much that everyone can access the files.So my question is, Is there anyway the Files get automatically downloaded on to the desktop just on opening the file, thereby the number of requests that are coming on the server will not have to wait for the previous responses to get completed((Literally)).Is there any provision for downloading files on desktop automatically in Internet Explorer or is there any such tool available ?

Regards
Balaji
 
Reply
 

D.T.P. Question

My dell laptop was accidently switched to widescreen. Now it won't go back to normal and i dont know how I got it on widescreen. How do I get it back?
 
Reply
 

Windows NT/XP Question

I recently got a Trojan virus. Is it possible that the virus could rename the Microsoft Outlook PST file and reroute it to a different folder? Each time I clicked the icon to start Outlook, it pointed to a file of mine that had JPG pictures. Would I have been able to recover the PST file by restoring in XP to a previous week backup before the virus? I lost all of my emails.

Thanks for your assistance
 
Reply
 

PC Software Question

Hi. I have a fairly new acer notebook with 1g ram
and a 1 g expandable slot that is currenty empty.
I ran a ram optimizer prog then shorty there after
my notebook began crashing. I checked the pc on a memory scanner on the web and it said 0 memory installed. Do ram crunchers destroy the memory card?
 
Reply
 

PC Software Question

i often play a game with my brother via lan connection we had no problems up until recently when his computer can no longer connect,the message WS_ WSAETIMEDOUT comes up. We both are connected off a wierless router,mine via the main computer and his off mine we played the game many times b4 with no problems do you know what may hav caused this to happen?
 
Reply
 

HTML Question

How do I prepare a graphic in Image Ready or Photoshop to send as an embedded graphic from mac Mail?
I created a small image map and saved it, but when I attach in Mail, it just shows up as a graphic not a link.
 
Reply
 

Networking Question

I currently have a desktop connected via Ethernet cable to a router for the internet. My son has a laptop using wifi to connect to the same router. Is it possible for me to monitor what he's doing online from my desktop? And anyway I can monitor or check his usage without him noticing?
 
Reply
 

Javascript Question

Hello, I am trying to make a contact form for my page and would like a group of check boxes visible based on the selection made in a dropdown list.

This is similar to your post regarding two dropdowns, but I would like the check boxes to appear based on the selection made in the second one. Is this possible
 
Reply
 

Windows NT/XP Question

Dear Sir,
My USB webcam is working on my XP, SP3. I have around 6 USB ports on my machine. The problem is, I had connected the webcam to a certain USB before I installed it's driver (or software). As a result, now that the webcam is working from the other USB's, the one I connected it to before the driver installation was done, does not detect the camera when I put it's USB in the socket. I believe I need a way to disable the camera's detection from this USB port. Can you tell me how? (Please note, the camera works fine from the other ports).

Thanking You,
Atanu Bandyopadhyay,
India.
 
Reply
 

Networking Question

I'm looking to buy an external hard drive for a small network application (6 users) to use as a file server for a church. I was thinking at least 1tb other than that what other functions might I need?
 
Reply
 

Javascript Question

I want to use your Javescript for tooltips but I want the tooltip showing when the mouse is hoovering over een area and not over a simple link. In the same time the area must be clickable.

here is one of the HTML lines I use for this

<area href='http://ams124/ISOT/Sales/services/strategy/default.aspx' shape='polygon' coords='151, 193, 180, 167, 209, 151, 238, 143, 264, 143, 303, 153, 327, 169, 352, 199, 362, 226, 364, 264, 349, 305, 319, 333, 278, 355, 241, 356, 194, 345, 168, 323, 147, 297, 136, 266, 136, 238, 141, 213' target='_top' >

My question is how can I use the javascript tooltip in combination with the clickable area

I have tried different ways to code this but non works sofar.
If you can help me with the right code to accompisch this I will be for ever in your debt.

Kind regards

Cees Klap
 
Reply
 

Mainframe Question

HI

This is satya. I would like to know about the detail concept of Stored Procedures and in which scenario this concept helps the programmers.
Please provide at the earliest

Thanks in advance
Satya
 
Reply
 

PC Software Question

should i get an i7 or e8500 for gaming??
 
Reply
 

Networking Question

Hello I have a Gateway 1450 solo and i'm wondering what the best router for it is. Also is that all i will need to get connected to my wireless internet. I'd like to get a router with good range of distance so i can use it anywhere in my house. Thanks so much for the help. Mike.
 
Reply
 

Graphics Question

I bought a new custom gaming desktop. No OS, so i installed windows xp with sp2 and ran fine. The computer starts up and everything runs fine but after 10 to 30 minutes my computer freezes and turns blank. It does that even when im not gaming. For sure i know its not a monitor error due to the fact that it works perfectly with my other desktop. Could my video card need updated drivers? I dont believe the video card overheats but i can double check that. The only possibilities i can think is, an overheating problem? did the person that built the desktop overclock it?
 
Reply
 

PC Software Question

how can I download from camcorder gr-d850ou to a computer? Has a AV connection and I have usb port
 
Reply
 

PC Software Question

Hi Felgall.

Im want to upgrade my Compaq ram memory. Its a 160gb Compaq AMD Semprom 3100+ 181GHZ 384MB of ram (PC3200). I want to try and buy it but afraid I might buy the wrong one online I just want a 1GB instead of a 512mb for several application use and internet use.
I see several DDR 184 pin DIMM and 400hz will these be it? Thanks in advance.
 
Reply
 

Javascript Question

Our company just opened two new offices. On our old web page we have a 'Plan your Route' button that has a form associated with it. You enter your starting street, city, state, and zip and press the button and it submits your address and our office address to MSN maps. A window opens showing a map and driving directions. This was great when we only had one location but now that we have two more addresses I am having problems. I only want to have one set of input fields for the starting address but then I can't figure out how to pass the destination address for the correct office. I tried embedding a table in the form with a button for each of our locations as a separate <TD> and then the Starting address in the next table row. I thought it would only pass the input fields for the selected button but instead it passed the hidden values for all three buttons. Since they are all named the same (str2, city2, st2, zip2) I always got driving directions for the first location no matter which button I pushed. I've decided there is no way to do it in HTML but I can't make it work in Javascript either. I tried a drop-down box but haven't figured out how to pass more than the str2 value. Is it even possible?
 
Reply
 

Windows NT/XP Question

Hello. My friend consideres himself a computer specialist so when I bought a new laptop he has done something to it without me being there. The problem is now only 50G of internal memory is showing and the information about RAM is nowhere to be found. It takes about 5mins to properly load and about the same time to switch off. I never had any problems with it before he messed with it. I really don't want to have to reformat it, could you help me please? (Its Windows XP, service pack 2, Iridium laptop)
 
Reply
 

Linux Question

Hello,

i need help about xcom, i try to compile it but it doesn't work.
it appears this messager error:'/home/development/XCOM/xcom/include/xcom/String.hpp:35: ostream: The file or the directory does not exist'
 
Reply
 

PC Software Question

I want to take a spare computer and load it up with cdrom drives and use it as a burning tower.
I don't want to run windows on it.
I have a crossover cable and ws thinking about using a small program in linux or some other OS to set it up.
I need some help.
shelby
 
Reply
 

Graphics Question

I have a strange question, or maybe its just strange to me ..I have a Dell optiplex GX 240 and I have a ATI AGP video card, I didn't like the speed of it or the power as it was only 16 meg so I got an ATI Rage pci card with 32 meg of ram I have a motha of a time installing this card?? I desided that maybe just maybe that the bios would offer some help so I switched the default to boot auto so my suprise without the AGP card plugged in the computer would not boot..so I once again went into bios and set it to have the AGP card as a default plugin well I was so upset I forgot to remove the PCI card..the card was recognized by windows as my card!! so I shut down and removed the AGP card and nothing happened ..in order to have this PCI card work I have to have both PCI and AGP card pluged in???I switched the monitor and plugged it into the pci and the monitor called it up and its working but slowly ( compaq 7550) I used the newer model on montor before and nothing, but this one works here is my question what the heck am I doing wrong?? and how can I remove this AGP card and use the PCI card by itself ..on this model of computer the pci card is plugged into a unit and then plugged into the socket on the mobo I have all updated drivers, I am running windows pro media the computer is a dell optiplex GX 240 I have 768 MB memory and the Pro is a pent 4 it has 1.79 gig tons of hard drive space and I am completely miffed by this I have tried everything but get another computer..and I would rather not do that ..please if anyone can offer some advice or tips to rid myself of this AGP card please let me know thanks.
 
Reply
 

PC Software Question

I have a 2 year old LCD monitor that is hoocked to my computer tower by a DVI cable. I has worked with no problem for the last two years. Recently, the screen would not come on when turning on the computer. The monitor light would be one however it blinks and there is no picture on the monitor. I tried getting a new cable and this has not solved the problem. I also tried blowing the entire tower out with spray air to rid of all dust. Neither of these things have helped. Do you have any suggestions. If you need any more information please feel free to ask.
 
Reply
 

Interactive Web Question

I have zen cart installed at standardperformance.com/shop, and it has been working. Now though, I am unable to login as admin or customer and I am unable to add to cart. Any ideas? I have been all over the zencart forums but not found any solutions to work. Any help would be great, thanks so much,

nate
 
Reply
 

Mainframe Question

ARE THERE ANY WEBSITES THAT WOULD HAVE EXAMPLE pl/1 PROGRAMS THAT I MAY LOOK AT? I USE TO HAVE A PL/1 PGM THAT WOULD COMPARE TWO FILE AND MERGE THE TWO INTO ONE AND CAN NOT FIND IT. I MODIFIED ON OLD PL/1 PROGRAM YEARS AGO BUT DON'T REALLY KNOW HOW TO START. SO IF I HAD A EXAMPLES TO LOOK AT IT WOULD HELP.

tHANK yOU,
 
Reply
 

Windows NT/XP Question

My laptop is going on and off by itself (sleep mode?) First the moniter after 2-3-minutes, then the entire computer, then comes back on, but not moniter unless u swipe the mouse pad. I cannot get power options to open, it flashes when i click it, but it will not open. HELP?
 
Reply
 

PC Software Question

I'm having samsung SGH U-700 mobile phone. I formated my pc and then i installed the samsung software to my pc. when i was connecting my phone to pc with data cable. i don't find any options on my computer. why?
 
Reply
 

Windows NT/XP Question

I made my font a little bigger so I can read it better. That turned out fine, but I must have changed something else I did not want to also. The icons in my system tray are fuzzy and a blur; and the clock and date are very small fonts. What do I change to get that back to normal. I did only have the time in there, and now I have the time and the day of the week. I only want the time. Thanks for any help.
 
Reply
 

Windows NT/XP Question

Hello,
At startup, I must go into Task Manager using Ctr+Alt+Del and then click Logoff under the Shut Down menu, before clicking my user account. (I am the only user on the computer and so there is only one account).
This has only been going on recently and I don't know what I have done to make this change. Could you please help out?
Thanks,
James
 
Reply
 

Javascript Question

I have two dropdowns, state and city, city getting populated by the state selection.
The two values are stored in the database.
If a user wishes to change his or her state and city,
I want the recent values already selected.
With the state, no problem,that's plain html, but the city is javascript
I need a piece or new code tomake this work
example where to get the datais:
/index.php?state=xxx&city=xxx
 
Reply
 

Networking Question

Hello!! I am in need of some help. I am currently a student working on client/server network with only two clients. In my lab I am only allowed to either browse the net or ask other users on the net how to troubleshoot my problems. I need to install Office 2003 on a Windows Server 2003 machine and run office from the server on the two clients. I have found bits and pieces of how to do this on the web. I have the server configured as a terminal server. I have not been able to find a good resource on how to install Office 2003 and run it on the clients. I think it has something to do with rdp files and .msi files. Can you give me a start to finish procedure on how to deploy Office 2003 on the terminal server, install whatever is necessary on the clients, and then run each application from the server on the clients. I want it to appear as the app is installed on the client (aka you see the icon on the client desktop, you double click it, but it then runs the app from the server). I would greatly appreciate any help you can give me!!!!!!!!

Steve
 
Reply
 

Windows NT/XP Question

i have lost over 500 family pics from my kodak-easyshare library, then the pictures were discovered
on the screen -saver slide show. i really wold like to find out how to send these pics back to my library!
i am using windows xp. any hlp is much appreciated!
-chris
 
Reply
 

Networking Question

I have a home wireless system. Recently I added on an answering machine and fax/printer. The add ons are working properly (sending and receiving etc) but my internet on my desktop is not working. I can still get internet off of my laptop via wirelessly. Can you help me . ..

Thanks
 
Reply
 

PC Software Question

My 17' monitor failed so I purchased a new 22' Wide screen monitor.Now I find some of my desktop wallpapers do not fit all the way across the screen,some have a 1' space at each end.How can i adjust my pictures to fit all the way across? My desktop resolution is set for 1680 X 1050 which is recommended by the monitor.I use Webshots Desktop.My pictures vary in size..2560 x 1600..2592 X 1944..3584 X 2384 pixels..ETC.
Any suggestions will great....Thanks...Ed.

 
Reply
 

Graphics Question

I friend just sent me a picture that I cannot open: HP_IZE. A message comes up saying something about fermentau dll.

Is there any way for me to open this?
 
Reply
 

Browser Question

My computer's desktop background keeps going away and leaving the screen blank everytime I pick a background and then go about my business. I ran virus scanners and windows defender but they say there is nothing wrong. how can i keep my background from vanishing?
 
Reply
 

Browser Question

I noticed you have addresses a few questions about Certificate Authorities. We have recently created a Certificate Authority on Windows 2003 for internal use. We have noticed that, now, in my browser in XP when I look in Options/Content/Certificates I see our Certificate Authority included. Do you know what caused this information to be pushed to my certificate store?
 
Reply
 

Windows NT/XP Question

Hello,
1. I installed windows xp and then windows vista. I had to re-install xp due to some virus problems. Now the startup menu where we can select between the two operating systems does not appear. Thats not the problem, actually i want to remove vista from my pc (installed in D drive, XP being in C). How can I do that? I have tried deleting the 'Program Files' and 'Windows' folders in the D drive of Windows Vista from Windows XP but it gives error:
'Cannot delete..... : Access Denied'
2. My friend bought a laptop having windows vista installed (registered as well). He want to run both Windows XP and Windows Vista in parallel. The problem is that he has not been given a disk of Vista and he dont want to lose vista. He has made the image of Vista and use it to re-install vista whenever any problem occurs. He has tried installing XP first and then installing Vista from the image file but then the Startup OS Selecting Menu does no appear.

Hope to get a quick reply from you. Please email me the link of the topic (of the forum) in case you post it in your forum.

Thanks,
Najeeb Ullah Khan,
najeeb_bannu@hotmail.com
 
Reply
 

Windows NT/XP Question

I have a HP Pavilion 8770c computer with xp professional installed. My computer has been freezing up alot, to a point where it barely functions. The only way to unfreeze it is to unplug the computer from the back and restart the computer. Also the computer doesn't even boot up properly sometimes, it freezes up before it boots up. What could be the possible cause. I was told that it may be my motherboard.
 
Reply
 

Javascript Question

Hi, i'm attempting to creat a webpage for work that will make it easier on rotational units in the future. so far i'm about 90% done building with HTML, and i'm trying to figure out how to set up a map of the area we work in the same manner you find on google maps. my intent is to link in thumbnail pictures of the locations around where we are and have them appear in a small 'word bubble' with a clickable link opening the full size picture in a seperate window. I'm semi-familiar with HTML and have been able to stumble my way through building the website, but have no experience with JavaScript. if there are any links, webpages, or you tutorials on how to set this up i would be greatful if you could help.

Sgt Winchester,
US Army
 
Reply
 

Mainframe Question

I want to know if compaq presario SR5470cf has a pci-e slot.
 
Reply
 

Word Processing Question

I was writing a really long document on my computer's word pad, and then my computer logged off on me for some reason. I thought it was okay because I saved it. However when I opened word pad, my document was nothing but a straight line of squares. I tried changing the font, but it didn't work. When I opened the document on my conputer in came up in microsoft word, pages and pages of nothing but the squares. IS there anyway I can convert it back to words?
 
Reply
 

Windows NT/XP Question

I have purchased a WDE1u3200a Western digital USB external hard drive and it will not plug and play onto my LENOVO 3000 C200 laptop with Win o/s xp.
I have tried to install it through Windows and it comes up with (code 1)invalid data and (not configured fault). I can't find a driver for it anywhere.
Can you help me in any way?
The hard drive works on other computers without any problems. Does Lenovo have problems recognising western digital?
Thankyou I look forard to hearing from you.
Regards
Norm
 
Reply
 

Comms Software Question

we are trying to check the status of XCOM SENDFILE command in AS400.

we could not trap any return message of failure or run an inquiry command to get the transfer status. Can you please provide us the exact command to trap the XCOM transfer status in AS400.
Rgd,
Raj.
 
Reply
 

PC Software Question

Hi,
I am a student and was wondering what the best Mac Apple Computer is to get. I am in a film course so wondering:
a) whether to get a laptop or desktop (thinking that I may take it into university) however unsure of which is better for me
b) what processor should i get?
c) how many ram?
d)what hard drive size i should get?
e) is it cheaper to get external memory not from apple and install it after i buy the laptop or desktop as apple's memory is really expensive?
f) are there any graphics cards i should get installed?
any other information about laptops or desktops etc for a person like me hopefully doing lots of films and editing on them
i hope you can help
thanks
 
Reply
 

PC Software Question

Hello,

I am having problems with closing my internet explorer. Whenever I close it, a pop-up will appear saying 'Send error Report' and 'Don't Send.' I keep on clicking the Don't Send button. The thing is whenever I do multiple researching, I need to open 4 or 5 internet explorer and when I am done with one of them, I habitually close it and then the pop-up will appear. Whenever I click the DOn't Send, all my internet explorer will close even if I am in the middle of my research..

The only thing I did before this event happened was to download Avast! Virus Scanner. After doing that, the computer started to reboot and some files were found to be infected by trojans and viruses and were automatically deleted...

I don't know if they are related. Kindly help me with this thing. I would really appreciate any suggestion on what I will do. Thanks!
 
Reply
 

Windows NT/XP Question

When i run 3ds max in windows xp after 5 or ten minutes there come an error below.

The ialmrnt5 display driver has stopped working normally save your work and reboot the system to restore full display functionlity .

i also installed anti-virus but the problem hnot solved please help me what should i do.
Thank you
 
Reply
 

Windows NT/XP Question

I am unable to see the C drive if I use the my computer icon, but it shows up if I right click on the start tab and use explore. any ideas what might be causing this.
 
Reply
 

Mainframe Question

what is control card in mainframes.How it is used? what all the parameters we can use in control card.
 
Reply
 

Windows NT/XP Question

Hello and thank-you for taking the time to read my question. I have a problem with my C: drive. I go to the 'computer' folder and click on ACER (C:) which is the C: drive. A little message box pops up that says, 'C:/ Is Not Accessible. Access Is Denied.' This is really annoying because now I can't paste or copy anything on my computer. I cant even back-up anything to a CD! And I have tried formating C: but the same message keeps appearing.
This all started when I was cleaning my drives (Defrag, Cleanup etc.)
Please help me! Thank you.
 
Reply
 

HTML Question

I want to make a login page for employees as well as validate them before coming to the new page.But in employees there are executives as well as manager,so i want the employees to see a different page and the manager to see the different page.so how to give appropriate link to different pages related to their position by giving the login and password in java/jsp using html pages.Pls help me with the coding.
 
Reply
 

Mainframe Question

1.what to do when any transaction is invalid in any region instead of having defined in SMFT file and the PGM1 CTc.?

2. Can someone give me complete cics transactions commands.?
e.g as we use CEMT I FIL(FILE NAME)
CECI LOAD PROG(PGMNAME) etc.
CWTO,CEBT, CEDA, CEBR, CEDF, CEOT, CDBI CDBC, CDBM, CETR, CEST, CEPG
 
Reply
 

Windows NT/XP Question

hi i have just recently upgraded the operating system on my other laptop from windows 2000 to xp proffessional i installed the software my self everything was successfully done now i cant connect to the internet i have not done anything yet to solve the problem only tried the internet connection wizard which didnt seem to help so i need some step by step advice now my internet connection is fine as i use the same connection on my other laptop i am using the ethernet cable to connect now am not sure if i need to install anything else
 
Reply
 

PC Software Question

Hello,
I have recently been given a computer by the name AST adventure210 do you have any info on this type computer? I can not get cd rom to download.
thanks sharon
 
Reply
 

Windows NT/XP Question

I have been using next G network and hate the download limit am in need of new broadband. Is there a way you can get good broadband on a computer in Australia by using mobile phone signal?
 
Reply
 

Mainframe Question

Sir,
I have one question.
I read in manual that virtual storage will
use DASD as its extension.I just want to know how
Region is obtained (i.e if virtual storage uses DASD as extension does our region parameter obtains space from DASD or its only on central storage) when we submit a job(i.e How this amode(31)and Rmode works on virtaul storage and how region parameter can be assigned any value below 2GB.If Z/Os uses DASD as extension to central storage to keep data(i.e Virtual storge) as said in the below manual statement why the data in virtual storage is not treated as I/O Exception.?)
 
Reply
 

Windows NT/XP Question

Dear Sir,

I have Gericom Laptop AMD with Windows XP Home edition, Model Blockbuster.
While trying to use media palyer i get a message stating that there is no audio hardware installed alhtough my computer has sound card and hardware manager shows no problem.
I would be pleased to have your reply.
Thanks,
M
 
Reply
 

Windows NT/XP Question

my computer has sound in windows like winamp, media player. but in Internet explorer it only shows the movie in youtube.com but no sound. i tried several steps like tools>internet options> advanced> play sound in webpage -not working. ive check the volume control of the movie in youtube its maximized. i believed it has something to do with registry
 
Reply
 

PC Software Question

My company is still using a version of lotus 123 for a spread sheet that our it department no longer supports now we are unable to get the macros to work how do i reinstall these macros and get them to work.
 
Reply
 

PC Software Question

I am building a computer. I have an nvidia Nforce 680i sli ready mobo with an intel 2.40 Any help2 quad processor. I am running windows vista ultimate, 64 bit os. When i add 4 gig sli ready memory cards the monitor will not come on. It works fimne with 3 gigs of memory but when i add the fourth card it will not start up. the computer will come on but the monitor stays black!! any help? Richard
 
Reply
 

Windows NT/XP Question

I think my computer has been hacked, or I have a big virus. I turned it on and my ad-watch gave me all these warnings which I blocked. Now non of my desktop shortcuts are working and I can't get to my virus scanner. I tried searching files and looking through my computer but all of them come up as a missing file, even if I try to change the icon. I don't want to reboot my entire computer and loose everything but I have no clue how to fix this. Somebody please help!
 
Reply
 

Mainframe Question


While defiing the IMS-DB using DBDGEN , how can i make sure that one field (say a key field or search field) canot be empty . Like enforcing NOTNULL in creating tables in DB2.What DBDGEN option can i give.
 
Reply
 

Mainframe Question

Hi Felgall

I'm working in IMS/DB/DC programs. I have to test one of the IMS/DC programs. In the program, the author has used the CHNG function in order to route the mesage to the printer which is not in our place.

As per a requirement, I have to modify this program with a single MOVE statement. But, I cannot test this program as the printer is not at our place.

Can I move the LTERM value of the screen to CHNG function, modifying the program, in order to test this program so that I can see the output back on to the screen.

Please clarify.
 
Reply
 

Browser Question

Last night, the tab at the top of my wedpage stopped showing the webpage name, and just a letter. Where it used to say 'google' at the top, it now just says 'g.' I don't know what I did, or how to fix it. How do I change it back? Thank you!
 
Reply
 

Mainframe Question

I'm busy with REXX and I wan't to protect the use of those REXX. So I wrote a pannel with INPUT and you have to fill in the password.
If you fill in the password then you see it. How can I protect this, or display *****?

With kind regards
Martin Verberne
 
Reply
 

Mainframe Question

Hallo Felgall!

I use PLI Version 3.5 and want to test the PACKAGE and FETCH funktions in PLI, but it don't works completely.
For the compiler I have used DLLINIT.

I hope you of you have an Idea.

thanks

Peter

Here is the source of the package:

KHT14: PACKAGE EXPORTS (PROC1,PROC2);

PROC1: PROC OPTIONS(FETCHABLE);
PUT SKIP LIST('HELLO1');
END;

PROC1: PROC OPTIONS(FETCHABLE);
PUT SKIP LIST('HELLO2');
END;

And this ist the source of the Main Programm:

KHT15: PROCEDURE OPTIONS (MAIN);

DCL KHT14P1 ENTRY CONSTANT;
DCL KHT14P2 ENTRY CONSTANT;

FETCH KHT14P1 TITLE('KHT14/PROC1);
FETCH KHT14P2 TITLE('KHT14/PROC2');

CALL KHT14P1;
CALL KHT14P2;

END KHT15;

Here is the error message:

IBM0590S ONCODE=9250 The fetchable procedure with entry KHT14/PROC1 could not be found.
From entry point KHT15 at statement 29 at compile unit offset +00000088 at entry offset +00000088 at address
0F700D08.

The funny thing

If I remove the '/PROC1' Text in the Fetch Statement, then it works and the first procedure in the package runs.
 
Reply
 

Mainframe Question

My question is about IMS. In CICS system you have XCTL and LINK sentences. Are there something similar in IMS system?
Thanks.
 
Reply
 

Windows NT/XP Question

basically, i have a bt home hub (BT2700HGV) and a sony vaio laptop.

for some reason my laptop only receives wireless up to about 1 meter from the router, after that it still says the signal is there but it just not - connected.

any tips?
 
Reply
 

Mainframe Question

my computer usb port has refused or failed to see my olympus fe/210 digital camera or its drivers when i installed them i was advised to use a card reader but when i put it in the port(USB)the same problem- computer says(USB device is not recognised)what is the problem and what do i do.
thanks
 
Reply
 

Windows NT/XP Question

Icons on my desktop change from intended icon. What I mean is an icon for XYZ is a dinosaur. Another icon is for my banking. Quite frequently change the picture. The dinosaur icon changes to a website I have visited sometime that day. If I click on the icon it does take me to the correct website. It lasts for a few days then suddenly the icons are correct. I have rebooted the pc and that doesn't reset the icons. I wouldn't worry quite so much if it didn't effect my banking icons. Any idea what might cause this? Is it a software problem?
Thanbk you.
 
Reply
 

PC Software Question

i an unable to get 'you tube ' to play any audio/video.all i get is a blavk box with a dot going in circles. i have 3 other audio programs and they all work so i don't think it's the sound card. any ideas?
 
Reply
 

PC Software Question

hi. i have downloaded a file onto my computer called flyakite, it is supposed to make your computer look like a mac computer. it has messed around with my computer. evrytime i try to go on the computer it crashes and when i do finally get on it i try and delete it by right click and delete and when i do this it just reloads that page.
i have also tryed control panel and it wont let me in,
. plz help


 
Reply
 

PC Software Question

hello. i am trying to run a 24/7 James Bond 007: Nightfire dedicated server online on my computer. it often crashes and doesn't restart on its own. so what i've done is create a batch file and make it say this:
:LOOP
bond_ded.exe -dedicated 1 +maxplayers 32 +map m8_missile01
GOTO LOOP

this makes it auto restart if it crashes without giving an error message. but most likely it will tell me a runtime error - pure virtual function call, or Bond_ded.exe has encountered a problem and needs to close. Send/Don't Send... what can i do to make it automatically restart on its own, and if the error messages occur, to automatically click don't send/ok or accept it and go ahead and restart it without me having to do it manually. long story short, i'm trying to run an online game server that repeatedly crashes with send/dont send and i need a way to make it restart the program automatically. thank you, and i hope i get a reply back very soon.
 
Reply
 

Browser Question

I am trying to download a driver from the cannon website and the 'download button' prompts another tab with a 'streaming object application' this blank page describes itself as transferring data from the site of this driver but it never starts the download. I am using a MAC w/intel and running Safari and I also tried Mozilla both do the same thing which makes me think it's some kinf of network setting? I tried a Windows PC and the download started fine. If I right click, I can save target and get other downloads. My issues are with this streaming thing - any answers?
 
Reply
 

PC Software Question

I am using PHP5 (and Javascript, Ajax etc) to build a web based business application.

I have studied many books and articles regarding OOPs and comparisons to procedural techniques, pros and cons, etc.

I would love to see a clear (simple as possible) practical example of where OOP is advanageous compared to procedural code (PHP code please).
 
Reply
 

Interactive Web Question

Dear All,

I am developing a toolbar using javascript for my website(asp.net with c# ). I made the mysql database connection in my system via toolbar. But I cannot connect to the mysql server from the remote system in LAN.

If I installed the odbc driver in the remote system, the database connection is established.
My request is that I need to make the remote mysql database connection via toolbar without installing any odbc driver in the remote system.

please help me,

Thanks in Advance,

J. Mohan.
 
Reply
 

PC Software Question

What Microsoft xp Tablet Pc edition operating system does the Tablet PC run?
 
Reply
 

Mainframe Question


IN IMS while calling PLITDLI it abends with U4036.

CALL PLITDLI(CT3,'GU ',PTR1,OUTPUT_AREA);

what could be the Reason?How could we rectify the error?
 
Reply
 

PC Software Question

I am trying to run a cd software program called 'cd label maker' but my pc takes me to my scanner everytime.My PC crashed on me a few weeks ago and I'm trying to input some programs to no avail.HELP !!!!!
 
Reply
 

Comms Software Question

what does XCOMM0780E error indicate.
I have specified IPNAME and IPPORT in my JCL.
It gives XCOMM0780E Txpi 203: Gethostbyname error return value = 1112
error.

 
Reply
 

PC Software Question

Over the last month or so my computer has been spontaneously making noises. The noises are being transmitted out of the speakers (not hardware-based) and they vary in duration and type. Sometimes they are just rhythmic and varying tones of 'music', sometimes it is children laughing with music playing in the background, sometimes it sounds like a woman's voice saying, '...and now I'd like to direct your attention to...', and multiple other sounds. The best way I can describe the sounds is that they are similar to what you would hear if you were channel surfing with mute engaged on your T.V. set and on random channels at random times you de-mute for approx. 3-10 seconds before pressing mute again.

It seems like I might have a virus causing this problem, but my virus protection software hasn't found anything, nor my spyware detection software, nor my registry maintenance software, nor the computer technician that I called out to my house about these 'noises'. (He may have left thinking I was crazy!)

I have high speed internet through the same company that carries my phone and cable T.V. services. Is there a possibility that these sounds are somehow related to an issue with my ISP? This is nothing I've ever heard of happening before. Do you have any suggestions as to what might be the cause, and what might resolve this situation?
 
Reply
 

Graphics Question

hello
my questioin is about my monitor. i had taken it to my buddies house and when i set up my computere at home again...after i turned everything on the screen was a wierd colour...it has a bluish tint to it.
I went into the screen menu and reset it and then it went good for 2 seconds and then it goes back to the bluish tint....its an LCD Acer 17 inch....
anyone have a clue what the deal might be?
let me kno...thanks
mar10
 
Reply
 

Javascript Question

i have to create a an page in which i have to add table with 3 rows and 3 columns and i have added in each row an drop down box, and in bottom of the table i have add on button which on clicking must add one more row of drop down boxes. i want to know the java script to make this function.....
 
Reply
 

PC Software Question

Hello, my mpg files work correctly, but they have an incorrect icon. It looks like a piece of paper folded in the top right hand corner, with a square in the middle with 6 different coloured boxes. I can open the video and it works in any video player, but I can't seem to get the icon working. I played with folder options, but nothing worked. Can you please tell me how to get the correct icon displaying?
Thank you =)
 
Reply
 

Mainframe Question

i have a swf tutorial flash, i want to convert it into video file, but it does not work. then i used screen recoder , but the word in my flash is so fade and fizzy after i posted in the youtube.com
this is my flash

http://www.screencast.com/t/MVZPe1yF
 
Reply
 

Mainframe Question

I am running a BATCH IMS program under DFSRRC00
. I would like to debug my program running under DFSRRC00 using the '/TEST(,,CMDS,MFI%B7984:*)' run time option. This should display my program in a LTERM screen B7984. I am not sure how to pass this PARM to DFSRRC00. Could you help?

Thanks

 
Reply
 

Windows NT/XP Question

hi i have just bought a windows xp indego edition 2008 from a site. in that site written this version of windows installs all of drivers,but it does not do so and does not let me to install a driver,windows tells me:windows file protection. and i can not install it. help me please.
 
Reply
 

Networking Question

hello,

could you please let me know if it is possible to use telnet on a remote machine as a proxy for web requests? is there a way to use this remote telnet machine as a web proxy? is that the same thing as a SOCKS server?

thank you.
 
Reply
 

Mainframe Question

Hi,

I would like to know the solution for converting a file having data in XML format into a sequential Mainframe dataset.This has to be set up as an automatic process.
Please let me know various oprions.
 
Reply
 

Mainframe Question

Hi, I am trying to invoke the DB2 QMF from a COBOL/CICS program. I give EXEC CICS XCTL QMFE. But nothing happens. The program is not switched. Could you pls tell me how to call QMF from COBOL/CICS and get back to CICS when exited from QMF ?

Appreciate your help!. Ranjith
 
Reply
 

Comms Software Question

Hi,

How to configure the XCOM software installed in a Windows PC to accept files from the Mainframe. I would like to know where to mention the IP address of the mainframe and how to setup a user id, password for the mainframe user to send files to the PC.

Thanks,
Srinivas R
 
Reply
 

Linux Question

I use Outlook Express as my E mail Client. When I log into my website's control panel and then from Webmail Client horde email , I have more than 150.000 emails in my account .I want to delete them at once
 
Reply
 

Mainframe Question

How to debug a CICS Program which is involked thru EXCI interface from a batch program?
 
Reply
 

PC Software Question

downloading VOIP software - ratznjammers

I go to http://www.aceconference.biz/ and click on 'To enter the Conference Room: Click Here' That loads an alert window to download the software.

I save file and download it.

When downloaded, I try to install it.

I get error message that says 'The Audio/Video Conference software was not installed properly - Please launch the installation process again'


This is a VOIP program that wont load properly
I can not load or open any of my VOIP programs
- Conference.exe

I have CA Antivirus Anti Spam Firewall Spyware
I can not find anywheres in CA , a place to
allow the Conference.exe

any ideas on how to fix it?
 
Reply
 

Mainframe Question

hi!
what is memory in liquid status?
and what is it's phrase?
thks
 
Reply
 

Mainframe Question

IN JCL COBPARM is used for what purpose? What does AMODE and RMODE for COBPARM signifies?
 
Reply
 

Mainframe Question

Hi:

We currently have the ability to run a pure batch IMS program that accesses DB2 tables; however we can't seem to run a batch program that accesses both DB2 tables and IMS Data bases as a BMP. And I just know it can be done, I just don't know how.

Could you possibly point us to which manual in the IMS or DB2 library that might give us some example JCL that would permit is to access both IMS databases and DB2 tables in a BMP job. I have a feeling that our current IMS proc that runs BMP is not set up correctly. It is also possible that our DBCTL region JCL is also incorrect. We are running
Version 9 of IMS and Version 7 of DB2 all under Z/OS Version 1.5. Also we are are NOT an IMS DC shop. We access all of our IMS DBs and DB2 tables on-line through CICS.
Any suggestions you could give us would be very much appreciated.

Thank You,

Robert M. Meckley
Email: Mrbobmeckley@yahoo.com
 
Reply
 

Mainframe Question

Hi I am currently trying to use )CCSID NUMBER(xxxxx) and am hoping you can substitute a variable insead of the 5 digit number the z/OS 1.9 manual seems to point to this as an option...(xxxxx/<var>)I cant find out if this is valid or how to set it up if it is can you help please....Thanks.....Paul.
 
Reply
 

Windows NT/XP Question

When I try to use ctrl alt delete to end a program I no longer get the task manager that I used to get. I get a screen with running programs, etc., but I can't choose any of them to turn off. I would really like to have my old task manager back. Any ideas?

Also, and I doubt that this has anything to do with the above problem, but I don't have that little volume icon on the bottom of my screen that I used to have. I bet this is a really easy fix.

Thanks for any help you can provide.
 
Reply
 

HTML Question

I have 2 sets of radio groups. the first always has two values. but the sencond changes on the selection of the first...and the values come from the db. I need to keep one of the groupfirst radio checked and the corresponding radio group to be displayed when one opens the page ...but I am unable to do so.

I have used the following code but it doesn't help.

plz help me.

$data=$_GET['data'];
$val=$_GET['val'];



if ($data=='groupfirst') { // first radiogroup

$result=mysql_db_query($dbname,'select `id`, `groupfirst` from tbl_groupfirst order by `groupfirst`');

echo '<td><input name='groupfirst' type='radio' value='1' onChange='dochange('groupsecond', this.value)' onclick='dochange('groupsecond', this.value)'><font color='#004a80'>Group First item first</font></td>';
echo '<td><input name='groupfirst' type='radio' value='2' checked onChange='dochange('groupsecond', this.value)' onClick='dochange('groupsecond', this.value)' ><font color='#004a80'>Group First item second</font></td>';

} else if ($data=='groupsecond') { // second radiogroup

$result=mysql_db_query($dbname,'SELECT `id`, `groupsecond` FROM tbl_groupsecond WHERE `groupsecond_id` = '$val' ORDER BY `groupsecond` ');
$Go = TRUE;
echo '<table border=0 cellpadding=4 width=600>\n';
while ($Go) {
echo ' <TR>\n';
for ($i = 0; $i < 3; $i ++) {
if (!(list($id, $name)=mysql_fetch_array($result))) {
$Go = FALSE;
CONTINUE;
}
echo ' <td width='33%'><input type='hidden' value='' name='groupsecond' /><input name='groupsecond' type='radio' value='$id' >'
.$name
.'</TD>';
}
echo ' </TR>\n';
}
echo '</TABLE>';
unset ($name);
unset ($Go);



}
 
Reply
 

PC Software Question

Why does 'save as pdf and xps' tool from microsoft for office 2007 make errors in math. equations in pdf files after the first pages if the word file contains many math. eqations?
 
Reply
 

Windows NT/XP Question

I put a new hard drive (C:) in my computer and then reinstalled the old hard drive and assigned drive letter D: to it. Now when I do a search for files/folders on C:, it reports files on D: too (I guess because there is some sort of index catalog that thinks the drive is still called C:. If I am right, is there any way I can easily clear the contents of the index catalog on D:? And then how to get the drive re-indexed? They say that indexing slows down a computer, but can I avoid that by setting it to do its indexing during the night?
 
Reply
 

Networking Question

I recieve movies on my PC from netflex. Is there a way I can hook-up my large screen TV in the livingroom to view these movies. If so, is there any wireless hardware that I can buy to do this. My TV has several video inputs.
 
Reply
 

Mainframe Question

how Mod function works in PL\1?
 
Reply
 

Browser Question

I've got a javascript error when calling the Ajax.Updater method from prototype.js lib the error message is:
too much recursion
return Object.extend.apply(this, [this, object]);

whould you please help me.
thank you
 
Reply
 

Mainframe Question

We are a mainframe shop with multiple CICS regions. One of our programmers is asking how to Generate the name of the CICS Region in the map for his application. Much like the CEDA & CEMT give at the bottom with SYSID & APPLID. Our APPLIDS to correspond with the region name. How would that be accomplished in a Cobol Program?
 
Reply
 

PC Software Question

how do i restart my windows vista like when i first got but without deleting the actual window that came with it
 
Reply
 

Networking Question

My notebook automatically tries to access a LAN connection that I am not familliar with. It does strange things when connected to this network. It opens up internet explorer all by itself even though it is not my default browser. Could someone be tampering with my computer? Should I be worried?
Any advice would be greatly appriciated.
Thanks,
Adam.
 
Reply
 

Windows NT/XP Question

HI,
My computer runs on Windows XP Professional-service pak 2- Amd Antholon 64 Processor 3500 at 2.01 GHz-with 1.5 GB OF Ram. I also have Norton antivirus 2007 and Uniblue Power pack to get rid of virisus anf spyware and the do a good job but every morning my computer is running slow. I check the amount of memory being use about, 430mb out of 1.5 of ram and i cant see why this is, I have very little running in the background and I always watch the add ons. Do you hve any suggestions
 
Reply
 

PC Software Question

i have a Motherboard Name Asus P4SD-LA and they say it uses non.ecc ram,,,well i bought ecc ram by accident threw a friend that was a deal. HYS72D64300GBR-6-C 184P-DDR-512MB-PC2700-ECC DDR

will my computer not run it,,its a hp a250n..or does the factory hp peple just say that so you buy there ram..?will it work?will it burn my computer up?or just wont come on?ive been told that even though they say only takes non-ecc it works sometimes,,my friend who sold me them said it worked in his dell,,and they said non ecc only...Please help
 
Reply
 

PC Software Question

im buying a ibm think pad for work i have a apple imac at home how can i transfer files at end of day to my apple and be apple to read and change the files and transfer back to the pc. right now i have a macbook pro and i transfer small file thru blu tooth. is there software to make this as easy as having both apples
 
Reply
 

PC Software Question

when i click on my shortcuts on my desktop, all I get is a window where I pick a printer. I have 2 printers.
my shortcuts will not open. can u help. I have a XP system
 
Reply
 

PC Software Question

hey i have a intel celeron and i play world of worcraft now i want to get a better so can i fit a GEforce FX 5700 LE APG into my computer
 
Reply
 

Windows NT/XP Question

When we re-installed windows on our system, we deleted the old partion and created a new one. Now, when the system boots, instead of starting windows, it asks us to choose which operating sytem we want to use, and then it starts windows. Is there any way to change the system boot to get rid of that extra (annoying) step?
 
Reply
 

Javascript Question

I am looking to set up a quiz with a result and certificate page. So I need to create 3 html pages and hope to use css to hide / show the correct answer. Once the next button is pressed and a correct answer is reached, I will increment the correct value to a cookie? At the end of the quiz you can go to the result page showing fail, pass or distinction, and users will be linked to the certificate page when they get a distinction. I'm hoping to find some examples on the web, but I have not had any luck yet. I've managed to create my question page but not sure how the result page should look like.

Any guidance will be much appreciated.
 
Reply
 

Networking Question

i have broadband connection for internet conneciton and all client side computers access internet thru proxy server. but some restrictions are there how can bypass this proxy server and access all the websites.

itnernet---> broadband conneciton --> proxy server --> client side pcs

i have two proxy ip without this ip could not access internet so tell me what is the otherway so that i could access all sites.
 
Reply
 

PC Software Question

i was deleting files and i deleted my documents folder i have looked every where and cant find it. I have a windows vista home basic
 
Reply
 

Windows NT/XP Question

A friend sent me a file using certificate trust link, how can I open up this file on windows? Thank you
 
Reply
 

PC Software Question

When I convert and burn video files with vso convert.The disk always skip and is corrupt but still plays.I close and aps when i do this and various scans reveal i have no virus.my cpu usage is around 1-5% oyeh i turn my iner net con off to.I you could help that woud be great.
 
Reply
 

Graphics Question

I purchased a PC that allows it to function as a digital cable box. My question is this: Can I have two monitors, one of which I can view cable tv on and on the other monitor can I work on a computer program?
 
Reply
 

Windows NT/XP Question

hi there, i am trying to get a programme that i d/loaded to my pc onto a cd,when i have d/loaded it i have readme,documents,and then the programme,what do i do next to get this on to cd,so that when i put it back into cd drive it will load up?? many many thanks,johnboy!
 
Reply
 

Mainframe Question

We have a storagetek 5000 line impact printer, no longer hooked via bus & tag cables to our small IBM with channel controller. We also have Windows/DOS PC with a BARR datastream PCI slot channel card that can connect via bus & tag cable to an Oce IPDS laser printer (this works fine).
-->> what software can I locate that will enable us to print from the PC to the 5000 impact printer?
 
Reply
 

Graphics Question

More than a year ago i got a virus on my computer and i know its gone but i cant put backgrounds on my desktop like I was before. Like if you right click the desktop and go to properties it'll say RESTRICTION: This operation has been cancelled due to... and I really want to be able to put backgrounds on my desktop. please help. thanks!!!
 
Reply
 

PC Software Question

ok i have mashita dvd-rom a765 driver installed on my computer and am trying to burn an audio cd on a cd-r disc but am struggling and it is saying the disc is not compatible but when burning cds before i have always used cd-r or is this a problem with my driver im lost please help!!!
 
Reply
 

DOS Question

I have a pent II/windows 95 pc. It has a special password protected program of which I don't have the install discs. I can upgrade the pent II to 98, w2k, and xp. However, I am unable to upgrade to pent III or higher. With the upgrade of xp/w2k installed to the pentII/win95 hard drive, the program works fine, but when I take the hard drive out to put in the pent III it does not work. I have also tried to transfer file/settings in xp and it does not work, all files are transferred, but since the program is password protected, it will not work because xp does not transfer passwords.
SO, long story short, I want to upgrada pentII/windows 95 to a pentIII/pentIV with xp.

thanks
 
Reply
 

Graphics Question

Video clips or movies of any kind won't play in any media player. I have tried them with Nero, Winamp and Windows Media Player, the sound comes out but the video does not play (image). I updated the drivers for my video card..still the same. What am I missing?
 
Reply
 

DOS Question

Here's one you might be able to help me with - I bought, on line, a USB2 320 GO external hard drive to hold our extensive collection of vinyl...

Said drive appears twice, as D:/ and as F:/. This didn't appear to cause any problem, apart from the obvious confusion of seeing the same thing in two places... Win (Me) keeps asking me if I wouldn't perhaps like to format said drive D:/, which I don't really want to chance, just in case it formats all that hard-won music...

But recently I seem to be losing data - mp3 tracks take on a duration of 0.00, which means they won't play...

Any ideas?

Amitis, Simon.
 
Reply
 

Windows NT/XP Question

Hi, My PC uses Windows XP/IE 6.0: I tried to install a digital certificate (IE-tools-options-contents-certificates, and digital certificate wizard), but somehow I mistakenly chose 'other people' as the store location instead of 'personal.' After successfully imported the certificate in 'other people,' I tried to log into the web which requires this certificate and realized that the web did not recognize(could not find) the certificate. Then I realized that I should have imported it in 'personal' so I tried to re-import it but could never import it in the right location. Although the wizard says, 'The import was successful' everytime I imported it, the certificate never appears under 'personal' and always goes to 'other people' even when I specified the location as 'personal.' How can I re-import the certificate in the right place, 'personal'? It is so frustrating to see it melted into 'other people' and never enable me to log into the web I really need to. Thank you so much for your help. May
 
Reply
 

Windows NT/XP Question

I use copy and paste allot and use shortcut keys to open folders and program. What I want to do is create a shortcut key that will automatically paste what I've just copy into Microsoft Word. Instead of the usual open Microsoft Word and then manually paste it with Ctrl-V.....Thanks
 
Reply
 

PC Software Question

how can i remove viruses from my cellphone external memory card? ( rsdvmmc) it is infected by ravmon.exe, when I delete the contents, it says, 'the device is write protected', what software can i used to finally format it? windows format is unable to format it. or what can i do to re-use it again normally?
 
Reply
 

Mainframe Question

Hi,

Is there a possible command in DB2 that lets us know when a database/tablespace was last updated?

Do all users have authority to view this information or only the DBA does?
 
Reply
 

Javascript Question

I have a website with a transparent flash video player. With the current javascript I am using, the video will float at a predetermined position on the screen even as the page is scrolled.
What I would prefer to do would be to force the video to remain at the lower right or left corner of someones browser screen regardless of their resolution.
I have found many scripts to accomplish this with an image but I have not been able to successfully replace the image tag area with the video object/embed tag. The scripts always stop functioning.
Below are links to the current site with the current script, a link to a good script that I would like to replace the image with the video, and a link to a site that is doing what I want it to do.
Any help would be greatly appreciated. I really enjoy your articles. Thank you

Current site. http://www.virtualwebvideo.com

Link to page with script that does what I want but with an image. Can this be modified to insert a flash video file?
http://www.bobbyware.com/jfloat.html

An example of what I'm looking for is here.
http://www.rovion.com

 
Reply
 

PC Software Question

FTP clients uploads site to ftp.org & not directory ?

August,
Installed Filezilla, uploaded webpages perfectly to
ftp://ftp.insidewatch.org & to CGI insidewatch FTP server directory.

September,
Zero changes made on all programs & PC since last use. (win XP)
Filezilla uploaded webpages to only ftp://insidewatch.org.
nothing uploaded to CGI insidewatch FTP server directory.

Uninstalled & re-installed Filezilla 2.2, 3.1 & Coffeecup free FTP.
Same response with all FTP clients.
All info showing in the 3 FTP clients interface
& all files uploaded to ftp://ftp.insidewatch.org is accurate & correct.

Many Thanks for your in-put. Have a great day.

S Elias


 
Reply
 

Linux Question

Hello,
what I want is this;a cron job dat checks/executes every 5 minutes a link like this http/www.haasjes.org/dada/plugins/dada_bridge.pl run=1

I did 0,5,10,15,20,25,30,35,40,45,50,55 * * * * get http://www.haasjes.org/dada/plugins/dada_bridge.pl run=1

But that doesn't work,crontab accepts it but it does not work.

Anybody a solution?
I have no root acces so I can't use curl.

Thanks in advance,
Paul
 
Reply
 

Mainframe Question

I would like to verify the existence of a member in a PDS through JCL. If the member exist, then I would like to validate the member. Otherwise create an empty member. How do we verify if a member of a PDS is present in the mainframe thru JCL ?
 
Reply
 

Windows NT/XP Question

How to access EISA partition?

Hello,

When I buyed my laptop, there was an EISA-Recovery partition on the harddrive. I needed to reinstall Vista. Firstly I moved my documents to the EISA partition and then formatted and installed Vista on the other partition.

After completing the installation, I can not reach the EISA partition.

In Disc Management page, I can see this partition (Healthy(EISA Configuration)) but no letter is assigned to it.

How can I recover my documents?

thanks...
 
Reply
 

Windows NT/XP Question

When I purchased a new computer and the fellow transfered my programs over the screen saver only comes on once in a while .
How do I reactivate it ? my old hard drive was destroyed according to the technition that did the transfer .
If I put in the MSN disk will I lose all of the programs I have in there ???
Thank You for any help ...
Gil
 
Reply
 

Browser Question

Every time i change the internet home page on my 7 computers, the next day its changed back to the old one

It seems ok and then when the computers shut down and restart the other web page comes up as home.

 
Reply
 

PC Software Question

after you install a driver, the system becomes unstable you try to reboot the system, but nothing happens.then you perform a second reboot and selecting the last known good configuration option from the advanced options menu, however, the system will not reset to the old configuration.....
what's the problem?
 
Reply
 

Networking Question

I ran windows network diagnostics these items failed.

VIA Rhine II Fast Ethernet Adapter I have uninstalled, reinstalled and rolled back no help.

Default IPGATEWAY=75.105.78.1 same subnet

DHCP Server = 10.235.40.14

DNSSERVERSEARCHORDER=75.105.128.61

Is this something I can fix? Or do I need to contact
satellite provider? Or someone that can fix a computer?

Thank You

Deb Sheedlo
 
Reply
 

PC Software Question

Can you please compare and contrast Microsoft Works 8.0 word processor and Microsoft Word 2007? If you aren't familiar with those versions, can you do a comparison on earlier versions?
 
Reply
 

Networking Question

I have win 98se and win xp. I have networked them ok. BUT I am trying to share 3 usb printers on both computers.
I have hooked up a keyspan US-4A server and Trednet TE100-S5 switch.
The xp comp. works, BUT I can't get the 98SE to work. After alittle more reserch (I read the requirements) I found out 98 is not compatable with this server!! (DUMB)Can I get these two window platforms to share printers this way, or another way.
 
Reply
 

Networking Question

At the place where I work, they recently switched our wireless network from assigning individual addresses and encrypting them to letting us obtain an address automatically. Now we do not use WEP encryption. At the time this switch took place, I lost my ability to use the following sites wirelessly, www.hotmail.com, www.myspace.com, and www.ebay.com. I can go to the computer that is hard wired to the modem and use these websites, but when I try to use them with my laptop wirelessly, I get kicked out of Internet Explorer. The network administrator assumes that it is because he is not using WEP encryption. If this is correct, then there is probably no cure. However, he keeps making the statement that it might be a setting in my computer. Can anyone tell me the setting that might be causing this so I can check and see if there is a setting I need to change?
 
Reply
 

Mainframe Question

need to know how to access the red lettered script on a toshiba satellite a 100
 
Reply
 

Networking Question

hi sir;

im new in networking field,would like to ask you question about networking IP and port forwarding.

the problem that im facing is, i need to ftp or someone access to my pc from outside world(internet).
they can ftp me and find me. they should enable to point mypc ipaddress when i need to someone to download anything from myserver or ftp,anywhere in the world.how should i do tat.

my network infra:

Fixed IP given by ISP: 124.x.y.79
and its connected to sdsl modem.

SDSL-->SMC Wireless router

i have SMC wireless router in myoffce setup.
that is connected to sdsl.enable other users to access internet.

the configuration in SMC wireless router is:
smc default router page is 192.168.2.1.

the configuration that i enterd in:

IP: 124.x.y.80
gateway that i entered: 124.x.y.79 (given by ISP)
DNS: given by isp: 202.x.x.x
dhcp enabled

this is the configuration that i did in smc router so that all others can used dhcp to access internet.

so everytime users access the internet they will have IP given by the router which is : 192.168.x.x
(thats working fine).

the problem that im facing is:
whenever i want to point my ftp what is address i should point to?so that other in the world can access n download files from my pc.or enable access my pc.

Should i do IP forwarding and how should i do that?if thats the case..

so that i can tell others to access or give myip to access myserver..and they can download files. or even i want to setup ftpserver which ip i should give.

my fixed ip: 124.x.y.79 (this will act as gateway rite)
OR
ip that i set in ipfield: 124.x.y.80


plz do help me..sir im confused how the ipforwarding works and how to set is up.
 
Reply
 

Windows NT Question

Hello:
It's hard to keep up with the new technology in computers.
What are the factors in computer speed? CPU, motherboard, memory...
Could you refer me to some site or pages that tells me about the computer speed and the new discoveries on each of those factores?
THX, Hameed
 
Reply
 

Graphics Question

i just orderd An ATI radeon x1950 xtx graphics card for my game medieval 2 total war was that a good choice
 
Reply
 

Word Processing Question

I am having a problem with Word 97 when I save, save as or close a document it takes 5-8 seconds to perform that request. Please help! I am waisting alot of time waiting for the document to save or close. It did not alway do this. It just started happening a couple months ago and I can't take it any more!
Terri
 
Reply
 

PC Software Question

I have a problem with my computer when I play games. I notice some kind of jerkiness when playing mini games such as snail mail and chicken invaders... but I dont get these when playing big games such as warcraft 3... I dont think that the system requirements for these mini games is bigger than warcraft 3 that it can be ruled as a hardware problem... thanks .
 
Reply
 

Javascript Question

depending upon text box entry i want to show drop down box with respective values.
means if user enters 'ls' in the text box i want to show the values like 'she','he' in dropdown box it appears in same page.

if text box entry other than 'ls' i want to show 'ladies', gents' in drop down box .

one more thing i want to hide this dopdown box until they have to give the value in text box..after deciding the value i want to show this dropdown list.

if any one help me..plz its urgent.........
 
Reply
 

Mac Question

i have an apple mac laptop ibook that i have saved nothing to, however, it says there is no space on the hard disc and so i cannot save anything to it at all. No one i know has any idea what caused it it just doesnt work all of a sudden. Sorry for being vague but i dont know much about computers
 
Reply
 

Graphics Question

i just recently hooked my tv to my pc intending to have 2 displays. i tried to extend my desktop on to the tv but i am not able to enable the tv. i have a ati radeon 9800 pro and i have installed all the lastest drivers and have no idea what to do
 
Reply
 

Javascript Question

Hi,

I currently am using a function that show/hides information when clicking on the main category link in a table. The following code is below.... I was wondering if I could add a 'Show All' link, so all the information from each category can appear with one click. As the user could click on the 'show all' link and all the information for each link would then show. The same would go for a 'Hide All' link. When the hide all link is clicked, it hides all the information in eah category. Any help is appreciated! Thanks!

function hideLevel( _levelId) {
var thisLevel = document.getElementById( _levelId );
thisLevel.style.display = 'none';
}

function hideAll() {
hideLevel('2006 System Operator Seminar');
hideLevel('2005 System Operator Seminar');
hideLevel('PJM 101');
hideLevel('Miscellaneous');
hideLevel('LMP 101');
hideLevel('Load Serving Entity');
hideLevel('Generation 101');
hideLevel('Generation 201');
hideLevel('Generation 301');
hideLevel('Operations 101');
hideLevel('Transmission 101');
hideLevel('Market Settlements 301');
hideLevel('NERC Standards');
}

function showLevel( _levelId) {
var thisLevel = document.getElementById( _levelId );
if ( thisLevel.style.display == 'none') {
thisLevel.style.display = 'block';
}
else {
hideLevel( _levelId);
}
}
 
Reply
 

Browser Question

Some info on my system first:
I'm running Winows 98 SE.
I have AOL 7.0 and IE 6.0 SP1 with a DSL connection.
Also have the latest update of Java.

My problem is that, all of a sudden (like 2 -3 weeks ago), after I signed on to AOL, I clicked one of their news stories and got this error message: 'ActiveX needs to run on this page or you will not be able to view it properly.'
Trust me - ActiveX is enabled. I checked many times. Also, when I try to remotely access & sign-in to my AOL account from Internet Explorer, I get this error message: 'You will need to enable cookies and javascipt to sign in.'

Yet, cookies & javascript ARE enabled!! I've gone over the browser settings a dozen times. At one point I 'enabled' everything in IE security & privacy, and also put everything to its lowest setting. Still, it didn't work.

Since I only get these error messages when I use & browse AOL, I even re-installed my AOL 7.0, but that didn't work either. I still keep getting the previously mentioned errors. Help!!!
 
Reply
 

HTML Question

My husband sent and received some yahoo email from our computer. He deleted all the sent and inbox mail totally on the yahoo account, but since he sent it from our computer, when I search my hard drive there is evidence that he sent mail somewhere, but all I can get is file names, a bunch of jibberish message id numbers and such. I am a novice at this. I don't know what all the numbers and equal signs mean. Can you please help me. I gave up on finding out what he said in the emails, I just would like to know who he sent them to. Is there any way that the properties numbers or file numbers say where it went?
Pam
 
Reply
 

Graphics Question

I am working on a website, but my graphics man is gone for a month. I was asked by my PM to animate a logo into a turning sphere. I have never done an animation in that form before.How can I get that animated? And who would you recomend to do it?
 
Reply
 

Windows NT Question

hi...i really need help..

my computer was working fine today up until i went to 'start', 'run', typed in 'msconfig', clicked on the 'boot.ini' tab, checked 'safeboot' and clicked ok...i restarted my computer...

when my computer restarted, it went through things like memory testing...memory frequency...and then it went black...

i tried to restart the computer and pressed F8...i tried all the options (e.g. safe mode...last good config...normal...bootlog...etc) but still does nothing...it just gets black...

when i turn on the computer..the sounds and lights seem normal...the first screen is black with white writing...the second one is with white writing as well (checks memory stuff and IDE) and make a beep sound...the third is with bunch of writing...and then the fourth one is just black....and does nothing....whichever option from F8 i choose, i can't startup the windows...just a plain black screen

what do i need to do? please help...thanx
 
Reply
 

Networking Question

I have a PC with two NIC's. One is connected to my LAN that has high speed internet. The other is connected to a wireless router that does not have internet. When both are enbled the internet does nto work on this PC. Is there a way to assign the internet connection to the NIC that is connected to the internet?
 
Reply
 

Networking Question

Hello,
I have one problem. I'm using BT Voyager router for two PCs. First one is connected through UTP (Ethernet) cable and second one trough USB cable. Thing is that both of us use program Skype for chatting and calling and when both of us (PCs) are sign in on Skype, one PC (still that one which is through USB cable) just lose connection after while...
When just one PC is on Skype, everything is OK!
Please if u know how or why it is happening, please reply, send me some instructions and tips.
 
Reply
 

Mainframe Question

I need instructions on how to set up a supersession between tso1 and tso5 on the mainframe
 
Reply
 

D.T.P. Question

Hello, I am a college student who has to issue an oral presentation on Parallel Processing very soon. My presentation must be 10-minutes long and should educate my class on the topic very well. However, I have been conducting some research on the topic and cannot seem to find enough information to fill 10-minutes worth of time. I was wondering if you could just give me some important aspects involved in parallel processing that I can further look into. Also, can parallel processing take place within a computer containing only one CPU? Please respond however and whenever you can. Thanks.
 
Reply
 

Browser Question

Internet explorer hangs when searching google. I have installed ie 7 in an effort (after trying almost everything else) and it still persists. : - (
 
Reply
 

Mainframe Question

If i want to determine size of database(IMS), can i do it and if yes tell how. In DBD i checked there is option dataset name and size=4096( normaly kept), is this size buffer size and is it mandatory or optional.
please reply.
 
Reply
 

PC Software Question

I recently purchased a microphone. I have an SB Audigy 2 ZS soundcard, and I run on XP. The problem with the microphone, is that whilst it is at perfect volume/quality when heard live through the speakers, if I attempt to record using sound recorder, it is incredibly faint, even with my speakers turned on full, my only current solution is to increase the volume to such a point that quality is severly comprimised. I can record audio with my webcam using the sound recorder, and the volume is fine. I have tried adjusting everything in all volume settings and still it is faint. please help
 
Reply
 

Windows NT Question

I have a TV show recorded on my hard drive Windows Media Center I would like to burn it to a DVD in real time to play on a DVD player? Please Advise.
 
Reply
 

PC Software Question

my daughter downloaded a movie in avi format and wants to now burn it to be played on a dvd player.what program is needed to achieve this?
 
Reply
 

Mainframe Question

I would like to know the session number & remote id if i am transmitting a file via xcom. How do i get the value of these paramaters?
 
Reply
 

Networking Question

i can not buy music on itunes it say to check my network settings but i did and its still the same and nothings working
 
Reply
 

Windows NT Question

I cannot see any video. Windows media player or streaming video. I get a message error and all windows that have video have colored square in the upper left hand corner. How do I get this back to normal?
 
Reply
 

Graphics Question

I have an Alliance Semiconductor ProMotion aT3D video card and also an nVidia GeForce2 GTS?GeForce Pro with 64 mb of memory I think. I was wondering which card is better...I currently use the nVidia card but it doesn't seem to have enough memory and uses a good amount of my 512 I have installed on my motherboard. What I am wondering is, would it help my system (windows xp pro 2002, sp 2) to switch to the other card??
 
Reply
 

Mainframe Question

Hello

How to find what are all the programs executed when I submit a CICS transaction.

Thank you very much
Gautham
 
Reply
 

PC Software Question

Hi, I`m not sure what is happening to my computer, after about 5 mins the DVD drive starts up then stops even when there is no disk in, then the door will open, after a further 10 mins a splash screen comes up saying, you cannot remotely access this computer, you help sugestions will be appriciated.

Regards
Paul
 
Reply
 

PC Software Question

Lost my ' Universal Bus Controller ' form my device manger, how do I get it back ?.
 
Reply
 

Javascript Question

I have created an issuelist in sharepoint. within the entry form, enable/disable or hide/show fields based on the value of another field is possible or not?

e.g., if the user selectes Sales and Transfer report, the fields pertaining to this report should be made available/enabled for user input.

Is it possible? if yes, how could i do this?
 
Reply
 

Browser Question

I can open yahoo and go to my mail, but I cant use the delete button and other buttons.
Here is an example; open yahoo mail no problem, I want to delete my mail I go to the check all and nothing happens I push the delete button under the check all link nothing happens. This is on most of the web sites. Its like the links are broken. Is it possible the is a setting in the internet program?
 
Reply
 

PC Software Question

I have a program and when I go to open the program it opens to the login page and then it says it is checking for the latest version - then it simply disappears and doesn't open. There is no firewall, nothing has changed since last week. I do not know what to do. The program is downloaded from www.renweb.com - which is a gradebook/school program
 
Reply
 

Mainframe Question

Hi,

Wanted inputs on how is an Online IMS program invoked? Am talking about IMS/DC programs.

For a given program, found a corresponding member in IMSVS.DCPGMLIB dataset. What does it mean?

For some programs, found that they are invoked by other Online programs upon pressing an appropriate PF Key. Both of these had an MFS.

But for some programs, could not locate an MFS also. Then how are these invoked ? Please advice.

Thanks,
Saurabh

 
Reply
 

Browser Question

I run Firefox for a browser and would like to make my fonts larger in my bookmarks column. Would I do that in my Display properties and where would I do it at? Is it possible to make those fonts larger? Thanks for any help you can give me.
Jim
 
Reply
 

Javascript Question

Hi,

I am using tinymce editor on my website and it is giving me a problem.

The editor works fully on the Internet Explorer browser.
But on other browsers like --- opera, mozilla, firefox all other options work but the file uploading feature does not work. The browse button on this when clicked does not show the dialog box. And hence I cannot upload any files.

U have helped me a couple of times earlier. Thnx for that.

Please help me as it is to be updated to the live site.

Nilesh.
 
Reply
 

Windows NT Question

I want to hook a wireless laptop and a regular desktop computer so that the both share an intenet connection. How do I do this?
 
Reply
 

PC Software Question

hi i need help i downloaded limewire already but i accidently downloaded it again now i cant use it plz i need ur help tnx
 
Reply
 

Mainframe Question

What is the transaction code for displaying screens from an on-line IMS session?
 
Reply
 

Mainframe Question

How to test a Db2 Table
 
Reply
 

Windows NT Question

Hi,
Can you please suggest a good book and software for learning 'Informatica' ?
Your help is much appreciated.

Thanks
Kaushik
 
Reply
 

Windows NT Question

what is the bar that displays when the contents of a window are not completly visible
 
Reply
 

DOS Question

I am loading win98se on an older computer. Motherboard is a gigabyte GA 5SSM and the cpu is a AMD 300 K6. 192 MG ram and a 10 gig hard drive. I had XP pro on this machine but it run slow so I am going back to 98se. Now loading the win 98se I find that the system will not boot from a floppy. It tells me invalid system disk. It will only boot to the cd. I checked the bios settings and they are correct for floppy boot up. I have loaded the program and on reboot I get a message saying there is not enough extended memory to run windows, close one or more programs. I have repartitioned the hard disk and reformated several times. I have only one os loaded on the hard drive. I put the floppy drive and the hard drive in another computer and loaded the program. The floppy worked ok and I had no problem loading the program. I then put the hard drive back in the computer in question and received the same message about the extended memory.
Could I have a bios problem or is the motherboard just starting to dye??
 
Reply
 

Windows NT Question

The color on my computer is very messed up & I don't know what has caused it. At first the color would be fine, then suddenly change. The darker red areas look like black & other reds look brownish, the yellow looks like an ill green, green looks very ill too(like bile!), white looks dingy, & blues are wrong, but the closest to being right, & so forth. I don't know if it's my computer or the monitor, or what? Can you help?
 
Reply
 

Networking Question

Hi. I have been having problems accessing YouTube for the past 3 days now. The page just never downloads. I've asked around, and people have said YouTube is working fine for them. DO you know what the problem could be. Thanks.
 
Reply
 

DOS Question

ok i have a hp computer with win98 installed & accidently inserted the restart in ms-dos mode & that made my windows start in a safe mode.so i tried to fix it back and now all i get on screen is boot up with hard drive or cd rom i enter cd rom & it will say starting win98 then i get a prompt to type in something & i dont know what so can i get my windows back without a cd or start up disk
 
Reply
 

Interactive Web Question

When im on this chat, all seems well for about 5 to 10 minutes. But Then it starts to seemingly downgrade.
As on this chatroom you are able to type in big fonts. But when it screws up the fonts get small and bolder. Then after five minutes, my whole computer just screws up.
 
Reply
 

Mainframe Question

can you give me an example clist where in you can translate jcl into clist codes to run it in foreground?
 
Reply
 

Browser Question

I have a cable (DSL) connection which has been working fine up until a few days ago, ever since then I have noticed that IE is very slow to open pages, sometimes failing to open links etc. when I ran a bandwidth test it showed my upload speed was fine at 127Kbps (my plan states 128) but download speed was only 55Kbps whereas it should be 3.5Mbps (according to my ISP). This tallies with the problems I am seeing at my PC, weird thing is that if I download files etc they seem to download at normal speed, this makes me think it may be a software problem? Any tips?
I am connected via a USB network hub and D-Link 502T external modem.
 
Reply
 

Windows NT Question

Hello, I own a HP entertainment notebook, and something seems to be wrong with my all usb drives. None of them are working right. When i plug anything in, it turns on, but the computer wont read it and Plug-and-play doesnt work. How do i fix it?
 
Reply
 

Windows NT Question

i have a problem my compter reboot one me with out warning, i have a had time some time geting window to start up, it come up with error and i try last know good seting, and that most time work after 1 or 3 time, i also get the compter to reboot some time when i plug in a USB, or play a cd in my rw cd rom or play a dvd in my dvd cd rom

this problem is really start to bug the day light out me, as it happen so fast or not at all
 
Reply
 

Javascript Question

I suddenly had an icon appear on my desktop that was labeled 'hs_err_pid348'...what does this mean?
 
Reply
 

PC Software Question

'The application cannot start because it is missing one of its components. The NvAudioMod.dll file is either missing or has not been registered properly. If this file exist on your computer you can re-register the file by using the regsvr32.exe file followed by the ful path name to the NvAudioMod.dll file.'
I received this message anytime I start my computer,any help I will appreciate.
Thank
 
Reply
 

Mainframe Question

How to debug using XPEDITER in Mainframe?
 
Reply
 

Networking Question

the local area connection says that it is disconnected and it is not it also comes up the media is disconnected and i can how do i fix this there is a REDX on the connection it is connected right everything is brand new what to i do pat
 
Reply
 

Windows NT Question

I am playing around with windows 2003 server just to learn more about it. I installed windows server 2003 correctly but at the bottem right hand corner it says evalutaion copy. What makes this an evaluation copy the cd I used to to install windows 2003 server or the key that I entered?
 
Reply
 

Graphics Question

my computer is acting up. it is a windows xp. when i try to play online games it wont let me. the screen for the game goes white and there is a red x in the top left hand corner. can u help?
 
Reply
 

PC Software Question

How do I add/store images in MySql database through PHP?
 
Reply
 

Word Processing Question

I need to have an example of how the hidden formatting of centering a word would have looked like in the early versions of Wordstar.
In otherwords, if I had typed in the word Hello and centered it on the page. If I displayed the hidden formatting what would it have looked like? I need this for a historical display.
 
Reply
 

Windows NT Question

One of our employees has left resently, but the problem is: they have put administors passwords all over the computer and now we can't get into alot of our files. How can we over ride/fix this problem without losing any of our file and important information.
 
Reply
 

Windows NT Question

I forgot my password for the windows xp login. Is there a way to bypass or reset this?
 
Reply
 

Graphics Question

Please help! My computer screen has turned completely red!! It is an extremely bright red that hurts my eyes!! Rebooting does not help. I cannot find any help on this! Any ideas?? Thanks!
 
Reply
 

Browser Question

I have received a Dell Inspiron 6000 from my son, and since I have had it, when I log into internet explorer it places MEF over and over again in the personal information section of all items that require personal info... any thoughts?
 
Reply
 

Windows NT Question

i want my pc to be wireless free does my pc require anything new fitted.before i buy a router......pc is a dell inspiron 1100..with windows xp home/edition
 
Reply
 

Windows NT Question

Alright my computer is being severely stupid lately. I own an XP, whoopie, but whenever I use Windows Explorer and go to 'my' own folder only some of the thumbnails show up, the rest are blank except for the little picture of a folder on them, almost as if there's nothing in the folder. If I use my graphics program (Paint Shop Pro 8), I'll try and load a picture and when I click okay after I find the image that I want, the program completely freezes and I have to close it. It also happens when I use my two different browsers, if I try uploading a picture to a site it does the same exact thing. If I try to upload pictures from a CD they will copy but not paste without locking up. It's a really big annoyance really, considering most of my computer work is done with pictures. Can you help me please?
 
Reply
 

Mainframe Question

Question.
I have a dataset having 100 members.Each of the member starts with a character A and I want all the members should start with character B.Is there any command where I can make it at one shot??
 
Reply
 

PC Software Question

Hello.
Firstly, I think you are doing a great job helping noobies like me on the internet.
Secondly, I have a question, maybe you can explain to me how to fix a small problem with my soundcard. I have a SB Audigy 2 Audio card, which has been working properly for the past 6 months. However, now it doesn't: every 2 minutes the volume on all programs goes down and I need to go to the Play Control Panel to raise the WAVE scale bar manually. I just don't know what to do about it. It's fine when I am in a chat, I can do it every 2 minutes, but it's very upsetting when I play computer games. Can you help with an advice? I really appreciate your input. Thanks!

Roman Khait
Brooklyn, NY

P.S. sound card is compatibel with Windows XP Home edition that I have, I checked.
 
Reply
 

PC Software Question

I had to rienstall my op system but I did not realize I had lost my case for office 97. now I do not have the code I need to install it all my file I saved on disc's are in office format's (word, excel, ext.) so I can not open them I can not afford to upgrad right now does any one know how I can get my code?
 
Reply
 

PC Software Question

I have asked at this site before and gotten valuable information, thank you.
I downloaded freeware animated wallpaper off of the internet from webwallpapers.com. I open application and push 'run' and I get the message 'Error' 'Unable to register Shockwave Flash ActiveX control. Please close all other applications and try again.'
I have closed all other applications and tried again, only to receive the same message.
I know I have successfully installed other animated wallpapers, video and flash. And my internet connection is fine.
My OS is WindowsXP Media Center Edition SP2 on a Fujitsu NSeries Lifebook Notebook 2006.
I currently have Exterpassive, Stardock, Vital Desktop, and ModernDesktop software installed for animated wallpapers. I also have DivX though I'm unsure what it does or if it's related. I only run one program at a time and they seem to work.
How do I get past the error message and install these new animated wallpapers?
Thank You Again, Rebecca
 
Reply
 

Windows NT Question

We had a power outage and since my computer has been doing the following. It starts and just when it gets ready to go to my desktop it shuts off. Why is it doing this?
 
Reply
 

Mainframe Question

how to find how many versions does a gdg have through JCL?
 
Reply
 

Mainframe Question

what is ALT-PCB? Difference between ALT-PCB and TP-PCB
in ims dc?
 
Reply
 

Windows NT Question

When I try to download active x or anything to to fix internet explorer, the internet shuts down,what's going on?
 
Reply
 

Browser Question

I have a sony pc with windows xp ..I constantly loose the internet ..wether I am hooked wireless or through ethernet cable I am using net gear through road runner.
The cable company has been out to my house 5 times in 7 days to help . They have rewired my hole house for stronger signal the router is only 5 feet from the pc, my wifes mac is right next to my pc on the same system without these issues. If I restart the computer I can re-connect but if I log off and log back on without restarting I will not get back on ...any ideas?
Thanks
John
 
Reply
 

Windows NT Question

I currently use dial up to connect to the internet, my problem is that I don't have to be online to have phone problems. All I do is turn the pc on and I can't receive calls but I can make calls going out. I had my phone line checked and it was ok, I even plugged in another pc to the same phone jack and it works perfectly with no phone problems. What do you think the problem is? Please help.

Thank you, Kim
 
Reply
 

PC Software Question

my Dvd-cd-cd-rom burner will play Cd-disc , music type
burned or store brought . But it wont read data disc
like no data disc I cant reinstall sofeware but I can install downloaded software with no problems so why cant my dvd-cdburner read data disc my old Cd burner that came with the computer also stoped reading data disc as well. is just a hardware problem or is my IED CABLES BAD WHATS THE PROBLEM
 
Reply
 

PC Software Question


I have this problem with msn messenger.It does not log me in.whenever i try to log in i get error messages like'signing to .net messenger failed because the service is currently unavailable
81000314'
i tried to reinstall,downloaded the dll file from imzers.com and still i am having the same problem.my firewall allows full access for msn.help me...
 
Reply
 

Graphics Question

I'm looking into buying a video card for a computer i'm building. Not looking at cost, what do you look for in a video card?
 
Reply
 

Networking Question

I recently got a Dell Inspiron laptop as a graduation gift from my parents. Everything works well accept I am having trouble connecting to the internet. I have a cable modem from Insight. It works fine with another laptop we have been using. But when I go to connect the ethernet line to my new laptop it will not acquire an IP adress and when I look at the status it does not recieve any packet. I have setup the connections correctly and have restored my laptop a few time. Do you know what could be wrong since it never did work? What can I do? I want it to work with the internet before I go away to school. Thank you so much!
 
Reply
 

PC Software Question

I need to get my DVDs onto the computer. Right now they are a bunch of ifos and subs and i need to get them into avi or something usable that i can edit them with.

Is there a program that will do this?
 
Reply
 

Mainframe Question

I am geting a return code of 60 while executing a IMS program.The problem is occuring during a execution of a CALL statement which compares the key value in the file and the database.If a match is found then only ti fetches.Even thoug the comparisio is perfect,still it is issuing a reurn code of 60.Can any bnody tell the reasoin
 
Reply
 

Windows NT Question

Before logging in Administrator shows 42 e-mail messages.
Question: how do I delete these e-mail messages being displayed on desktop?

I'm using Windows XP Media center edition.
 
Reply
 

Mainframe Question

Which is better the AMD Turion 64 ml-32 or the Intel
core duo T 2400.
 
Reply
 

Networking Question

I have problems with my PC loading web pages. I am connected and it says web site found, but it never loads and it takes forever. I use the wireless and it works fine. I use wire to another PC and it works fine. So it has to be my desktop, but I changed my NIC, started working fast again, then stopped. Could it be a short on my motherboard? How can I trouble shoot the prob?
Thanks!!
 
Reply
 

Browser Question

I'm on a wireless network internet connection. I am connected to the access point but it states that the internet can not be found.
 
Reply
 

Browser Question

I have a problem getting the free Macromedia Flash Player 8 to work. Macromedia Flash Player is shown in the Add or Remove Program. In IE add on I show Shockwave Flash Object/Active X Control/Flash8b.ocx.
When I go to a Web site with flash content I get a notation to click to activate and use this control but NO CONTROL appears to click. When I right click I get a dialogue box about Macromedia Flash Player 8.
I also see Web sites that have empty space where animation or flash should occur. In this empty space I see a small square with an X inside. When I click nothing happens. I have uninstalled and reinstalled the Flash Player with no result. My O/s system is Windows XP SP2 with IE6 preinstalled by Sony on my desktop. I have Java Plug in 1.5.0. I have the proper security settings in IE 6. M y softwear is Norton System Works and Spysweeper. I have gone through tech support with Sony and Macromedia with no improvement.I removed Windows KB 917425 with no result. Do you think IE6 has to be reinstalled or I should change browser to Firefox.
Thank you
 
Reply
 

Windows NT Question

When I boot, from a disk or the harddrive, I see the mouse but nothing else on my screen. After a few minutes it will go into screen saver mode and I can see the windows screen saver. Any ideas what I need to do?
 
Reply
 

Windows NT Question

i am operatng windows xp. if i click on my computer, i see several removable storages I use letter f formy digital camera card. after im through, and i remove the camera card, when i go back to my computer, the removable storage is gone, except for floppy. if i restart the computer, then they come back... help
 
Reply
 

Browser Question

can u look up your aim conversation history?

i've heard from many people you can.
 
Reply
 

Browser Question

i put a proxy server on my pc, now i do have wireless on a loptop now the question in does the proxy on my pc protect the laptop from the wiress router or do i need to set up the proxy on the laptop also. thanks
 
Reply
 

Mainframe Question

hi,
We are required to put the data on a queue(MQueue).
We are using CEETDLI program to put the data on the queue.
We are calling CEETDLI using CHNG and ISRT using same PCB.I am getting A2 abend. and I am not able to
write to the queue.
Please tell me how to solve this abend?
 
Reply
 

PC Software Question

I recently built a Windows XP computer, and everything about it is running smoothly with one exception. I've discovered that whenever I try to download any software (AVG, AVG updates, iTunes, Firefox, Java Runtime Environment, various plugins, etc, etc), I repeatedly get the message that my downloaded software is bad or corrupt. However, I've also discovered that I am able to download software onto a different computer and transfer it to my computer via my microdrive, and everything works fine then. I've tried everything (virus scans, reinstalling software, formatting my hard drive and reinstalling Windows), and nothing seems to work.
Do you have ANY idea as to what might be causing this or how I might be able to fix it? Thanks in advance for any help.
 
Reply
 

Browser Question

When i first log on for the day when my website pulls up its a yahoo home page. And in the web search window all 00000000 pop up.... I hit escape to erase the 00000000 but why are they there ? and how else do i get rid of them ?
 
Reply
 

Word Processing Question

how can I replace ie,
Valentine's Day [View Valentine's Day Gifts]
Mother's Day [View Mother's Day gifts]

the text of (any)4 words(or any # of text words) & the brackets
 
Reply
 

PC Software Question

hi. im trying to download a c++ compiler to my computer. but it wnt install properly. ive trid borlands cmpiler.ive tried installing it after iv downloaded it from www.borland.com. ive tried installimng on 3 different computers bt no luck.tried other compilers as well but no luck. PLEASE HELP!!!
 
Reply
 

Mainframe Question

Hi

I want to know whether a particular VSAM file is intialized or not.Is there any way to know this from it's Characteristics?

Thanks
Manohar.
 
Reply
 

Interactive Web Question

I am trying to find out more information reguarding an internet company. I have looked at all of their websites and sites in association with this company but I cannot find an address, state or zip code. I have conntacted the Better Business Bureau and they cannot help me without the above information. How can a person check out an online business reputation.
Thank you,
Megan
 
Reply
 

Mainframe Question

Hi

when i go to ISPF command shell i can see two charecters 'ES' getting populated in command line.Could you please tell me how take those charecters off.

ISPF Command Shell
Enter TSO or Workstation commands below:

===> ES

 
Reply
 

Browser Question

I having a problem accessing certain parts of a webpage on my home PC. TheKnot.com lets you create a wedding guest list, and you are supposed to be able to click on each guest's name and a new window will pop up where you can edit the guest's information. (There are other links on the page that have the same result, but I'm mostly concerned with the guest list capabilities.) When I click on a name, instead of a new window, the original page just reloads itself. If I right-click on the name and copy & paste the link into a new window, it's not the guest list that appears but the original page again. Firefox is my current default browser, but I've also tried this using Internet Explorer. So far I've disabled my Adblockers, spyware blockers, firewall, & virus protectors. I've reinstalled Firefox, created a new profile, & reset my default settings. And I still can't figure out the problem. The settings on my home PC are exactly the same as my office PC, & TheKnot.com functions just fine on the office one. Please help soon!
 
Reply
 

Windows NT Question

My computer recently started slowing, then stopped altogether. I ran every scan I could think of, uninstalled and reinstalled my Windows XP, tried several other things, and nothing worked. It would work fine in safe mode only. If I booted up windows normally, it would lag so badly, I couldn't get anything to work. My virus scan showed several trojans in the windows System 32. I removed and repaired them but it still lagged out. I noticed the BIOS driver was not functioning properly. I tried going through the system screen to see what was up, but nothing changed. I tried disabling the BIOS driver and reenabling it, still nothing. The last time I rebooted my pc and tried to reinstall Windows xp, my comp crashed completely. Once it finally rebooted, I had nothing. It had rolled back to the original factory settings and tells me I have no hard drive at all. It doesn't recognize my hard drive no matter what I try. HELP!!!
 
Reply
 

Linux Question

i just downloaded ISO files for linux and i mounted them to drives useing damon tools then i put disk one in drive & rebooted but nothin happend i also downloaded virtual PC but it wont load....long stopy short are there any alternets to Virtual PC
 
Reply
 

DOS Question

I use windows 98.The problem is this that the icons arenot seen on the desktop of my computer.Only the background picture is seen on the computer.How can i fix it.
 
Reply
 

Networking Question

Hello i recently reformatted my computer and when i got back on and hooked everything up for my internet connection it didint work, so i thought i found the problem that my network adapter was not installed but then i went on the internet on my laptop and download the right one and installed but sitll when i try to start my high speed up it still does not work can you help me?
 
Reply
 

Mainframe Question

does PL/1 has selection menu or panel facility like that of REXX?
 
Reply
 

Windows NT Question

I have no idea what has happen to my computer and I have no idea how to explain it either!!

Let me start out that I have windows XP.

When I turn on my computer it loads and it reaches this window screen (which is blue and has the windows pic) and it stops in its tracks. In XP I have it set up for user settings. So when I log on I can click on my name and put my password in and I get into all the files I need.

The problem is that it is stopping before it pops up the users and all I see is this blue screen.

I tried installing my operating system but when I turn my computer on with that disc it does the same exact thing and won't load it.

Help please!!

Brandi
 
Reply
 

Windows NT Question

I have a problem with windows XP pro. It occurs when I am starting up the computer (from a full powerdown, as in it is off.) the computer gets to the desktop and i can run things fine. but gradually it gets sluggish and freezes. But I just restart the computer and it probably gets sluggish and freezes again. When i restart 2-3 times eventually the computer starts up and runs smoothly and never gets sluggish or freezes and can run indefinitely without any problems. I hope you know what problem this is as restarting 2-3 times to get my computer running is getting annoying fast. Also I really don't want to reformat (as a. I don't have time, b. I reformated like 3 months ago) also the problem started like 3 weeks ago not when i reformated.
 
Reply
 

Windows NT Question

i use windowsxp pro with a changing ip. on top of that my at@t worldnet isp connects me with a changing ip. i use internet explorer 6. what can i do if i want to use a webcam
 
Reply
 

PC Software Question

My usb ports are not working and I have uninstalled them and reinstalled them but they still wont work. If you have any suggestions they would be appreciated because they are needed.
 
Reply
 

Mainframe Question

I load a Z(9)9 with a numeric value that is zero or greater (nowhere near overflow, less that 9999). The Z(9)9 is redefined to X(10). The X(10) -- call the variable 'A' is sent to an
UNSTRING A DELIMITED BY ALL SPACE
INTO X
Y.
A is an x(10).
X is an x(10) garbage field, and Y is an x(10).
Ocasionally (not always), I'll get an '!' in Y. Why?
 
Reply
 

PC Software Question

I have WINDOWS ME as an operating system. When I start the computer, WINDOWS start, and brings me to do my logon. (Choices are my self, my wif and my son).

When I logon I have my background picture but no ICONS?

This is true for all users.


thanks
Steve


 
Reply
 

DOS Question

hi, my question is that i have installed two operating systems on my computer windows 98 and windows xp. whenever i starts my pc i got that operating system choice menu. one day when i was working in 98 one message from my antivirus programmed (norton)came that something want to change my boot record i didn't allow it.
after that i restarted i didn't get the operatin system choice menu.
now how can i get it back.
thanks a lot
 
Reply
 

Mainframe Question

I have a CICS screen which have some fields to be user entered.I want to make a change in the screen in such a way that in one of my fields if the user is entering some particular values(not for all values),I need to pop up anotehr field in which user have to enter.
1) Can I make the change in existing map so as to add this hidden field
2)Can I make the change in the existing cobol-cics program so as to include a check (say an if condition) so that if that particular value is entered,pop up this field.

 
Reply
 

Windows NT Question

Recently, my computer has started having difficulty opening program files. When I click to open, the wait icon appears and then after awhile disappears, but the program never opens. When I check the task manager it doesn't show up under applications. The program shows up when I click the processes tab, but shows no CPU usage being applied to executing the task. I always have 46 processes showing even when I first start my computer. The only process that shows it is doing anything is the 'system idle process'. I desperately need to get into my TurboTax program immediately. Can anyone help??? I've called Compaq's tech support and can't get an English speaking person to help.
 
Reply
 

DOS Question

WHAT DOES THIS MEANS - FWCORE (01)+000049AB ERROR: OD:0028:C009B664
 
Reply
 

Mainframe Question

When we try to run a IMS/DB2 program from Batch , we are facing U3057 when SQL statement is executed. SQL CODE is -927. What should be the parameters passed to DFSRRC00 for executing IMS/DB2 program through batch.
 
Reply
 

Graphics Question

I am curently having problems with adjusting the brightness level in several PC games of mine (half life 2, Medal of honor...); that is, when I access the video options menu, brightness; sliding the adjustment switch doesn't change anything to the brightness level, which is relatively low, considering how dark these games can get. Could you tell me what this could be due to, and eventually how to fix it? Thanks.

Pascal M.
 
Reply
 

Comms Software Question

What do I need to hook up my computer to my hdtv to record showes without having a digtal video recorder?
 
Reply
 

Mainframe Question

i'm trying to insert &zdate in the panel def of isr@prim of GRPBOX1 how could i do this. the parms avilable in grpbox1 are

.GRPBOX1
..TMPROWS,TMPSHDW


 
Reply
 

Interactive Web Question

First of all, I use microsoft XP home edition, and I use Internet explorer 6. I have this problem with just a few websites, but the only one I use frequently is www.myspace.com : I go to the myspace music page, at the bottom of the page it says that it is done loading...But nothing ever comes up on the page. I have restarted my computer, cleared the cookies, files, and history, and tried using mozilla firefox. Please help me.
 
Reply
 

DOS Question

windows ME on dell 8100 E780. I get a message Monitor is in power safe mode activate using PC. This is on a black screen. I first checked the plug in on all the leads. All ok. Hooked monitor up to another computer and to another power supply. OK. I hit the flag key and it says monitor is ok Check connections. Which takes me back to the first thing I did. I have done this over and over. At one time I got a second screen saying the modem is ok. The monitor is doing fine with another pc. I am on another computer of a friend so I will have to get back to you as I try each suggestion. Thanks in advance for all you suggestions. Maybe one will work, before I have to wipe out the system and update. Need help
 
Reply
 

Windows NT Question

Hello, my taskbar and desktop icons are missing.
explorer.exe won't run. When I try to run it the taskbar shows breifly and dissapears.I've been using task manager to run all my programs for about a week now and it's getting very annoying!

Hope you can help,
Don
 
Reply
 

Windows NT Question

i have windowows media player and realplayer. but both do not play avi files. i dont no why. could u plz help me. it wont let me watch dvd's in them formats. it plays the sound but no movie. and also windows media audio/video player.
 
Reply
 

Windows NT Question

Hi! I have a Dell Latitude C510 Laptop that freezes up during installation of XP. I have tried the Dell disk that came with the laptop and XP disk that I purchased and it still freezes 38 seconds into installation while it is intalling the devices. I have formatted and tried to reinstallation but it stop at the same place every time. The problem started because it was not shut down right.
 
Reply
 

Browser Question

with a dell computer when you plug in a remote drive you can 'view the images as a slide show' that simply means each image will appear and stay on the screen for 5 seconds and the next will appear after working very nicely for 6 mos it stopped working dell told me it was a virus that caused this to happen not sure i believe them also the same malfunction has occurred when i try to 'view as slideshow' what is in 'my documents' can you provide help to remedy this problem thanks a lot
 
Reply
 

Networking Question

I have a one way satellite internet connection which menas that I have to use a dial-up also for my internet. My internet device is connected to my computer through a USB interface. My problem which I am hoping to have a solution for is: I have in my house 3 PC including my computer which is a labtop. I want to make a wireless network between these PC and my labto or between these PC and my satellite adaptor to allow all the PCs and my labtop to connect to the internet and establish the connection without going to the laptop and dialing the connection from there. Please help me in this and what is the recommended Hardwares I need to have. Also, if there is possibility to do it without connecting the USB satellite adaptor to my laptop and insted connecting it to a special router that handle the issue of connecting. Please also note that I need to use MAC address and proxy setting for my sateite adaptor and internet. Thanks
 
Reply
 

Browser Question

In Firefox I continually have to change the connection settings from direct connection to manual proxy configuration. Internet explorer doesn't have this problem. I believe the problem arrised when i installed a proxy hiding software. It has been uninstalled since though.
 
Reply
 

Comms Software Question

Greetings:
I want to convert old VHS to DVD and after talking to several computer friends they told me to use Dazzle 150 and others said Pinnacle Studio Plus, version 10 and still others said Microsoft Digital Image Suite 9. I want simple but complete and KISS (Keep it Simple Sweetie)technology. Could you please advise me. Thank you

Ed Trexler
 
Reply
 

Browser Question

hello...I have a website I originally did with ms frontpage. I have since changed hosting company and now do site with dreamweaver on my mac. Problem is...when I try to go to the site on my pc, it can't find the site. It works on every other computer except the one I originally did the site with using ms frontpage. Seems like my pc is still going to the old host looking for the site. I've tried cleansing cache and still it can't find the new page. Any suggestions. Thanks.
 
Reply
 

Windows NT Question

i dont know How to install and Configure LDAP server?so plz tell me how to install and configure LDAP server.plz immediately
 
Reply
 

Mainframe Question

Hi ,

I am new to ISPF panel programming.I have started making simple panels.It would be of great help to me if u can tell me about VGET,VPUT and profile ,application and variable pool concepts.I like to learn those concepts from an expert's words.Please help me.

Thanks in Advance,
KK
 
Reply
 

Networking Question

I am unable to establish dialup connection with my ISP for more than amonth now.By running Dr.Watson program it was reveiled that a security fix for Win98 downloaded and installed from the MS download site has changed Win file system for no apparent reason.Please help me to fix this problem.'ERR authentication failed'&ERR disabled' message gets displayed.
Thank you.
 
Reply
 

Word Processing Question

I've created an Excel data base in which one of the field is Currency, and another phone numbers. The format when merged into the final I want the format to be $xxx,xxx.xx for the currency and (xxx) xxx-xxx for the phone number. They only merge as a plain sequence of number with no formating. How can I obtain the format in the mailmerged document?

Ron Riemar
ron_riemar@hotmail.com
 
Reply
 

DOS Question

There is nothing that shows up in All prgrams (Windows XP, Start then All Programs). How can I restore this? Where did it go?
 
Reply
 

Windows NT Question

when installing software from cd-rom on my ibm netvista comp 1.5 ghz 512 mb ram it take a little while but on an old comp 500hz 128 mb it loads in quickly. doesn't make sense but how do i get my comp to install software more quickly (ibm)
 
Reply
 

This PHP script was Built by Felgall Pty Ltd

go to top

FaceBook Follow
Twitter Follow
Donate